03-27-2017 07:43 AM - edited 07-05-2021 06:44 AM
We have a WLC running 8.2.121.0 that has Wireless 802.11b > RRM > Tx Power Control(TPC)) > Minimum Power Level Assignment set to 10 dBm. On a 2802 AP, that should be about power level 5. The WLC Power Level Assignment Method is automatic. The APs are set to use the global power and channel configuration. However, the APs lower their power to 6 or 7, which is below the minumum. Any ideas?
03-27-2017 12:59 PM
I wouldn't recommend using firmware version 8.2.121.0 with 2800/3800 APs. Try 8.2.151.0 as it's more stable and mature.
03-27-2017 01:19 PM
I'll try that when we get these APs on their own controller. Thanks for the fast response.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide