07-26-2007 08:46 AM - edited 07-03-2021 02:24 PM
08-01-2007 10:23 AM
WLC1 and WLC2 are configured within the same mobility group. WLC1 and WLC2 are configured within the same mobility group.The other half of the access points are configured to use WLC2 as the primary WLC and use WLC1 as the secondary WLC. The fallback feature is enabled on both WLC1 and WLC2.
07-11-2013 06:40 PM
Hello,
Aggressive load-balancing on the WLC allows the LAPs to load-balance wireless clients across APs in an LWAPP system.
Please take a look at the following cisco doc which illustrates aggressive load-balancing on the WLC:
http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a00809c2fc3.shtml
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide