WLSE RFManager without ACS Server and LEAP

[yong1794]

70 AP1200's and 120 non cisco wireless client's are using in my site. and i got WLSE 2.5 for managing RF and other useful functions. But I have no ACS server and AAA Server, How can i setup WLSE using for RF Manager and WDS.. I already set up ap1200 to local radius server and WDS. but it didn't work. the fault message is "WNM failed to authenticate with WDS"..

and the Add AAA servers menu in WLSE,When I input my rocal radius access point IP address, the message say the server already exit" But I can't find any server IP in left list.. Please help me!!

[#2]

For the main WDS candidate, configure an access point that does not serve a large number of client devices. If client devices associate to the WDS access point when it starts up, the clients might wait up to 10 minutes to be authenticated.

You can go through the following URLs:

http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_guide_chapter09186a00801d017e.html

http://www.cisco.com/en/US/products/sw/cscowork/ps3915/products_white_paper09186a00801d8630.shtml

[minie]

Did you follow the links in following config examples? They are very helpful.

http://www.cisco.com/en/US/customer/products/hw/wireless/ps4570/prod_configuration_examples_list.html