WLSM and restarting AP1200s

[gtelles]

We are trying the WLSM with 5 AP1232s and see situations where the APs are registered and operating fine, but laptop clients cannot communicate. The clients associate, receive an IP address, but cannot communicate over the network. We reset the APs and then the clients work and communicate just great. Then a random time goes by (we have not noted exactly how long these periods are), and we need to rest the APs.

Also we are using 2 Cisco 7920 phones and they never seem to fail, even when the situation, as noted above, occurs.

Thanks,

Greg

[ebreniz]

Could you be more specfic about the client that you are using a/b/g and any encryption protocol, or authenication done.

http://www.cisco.com/en/US/products/hw/switches/ps708/prod_module_configuration_guide09186a00802445fd.html

http://www.cisco.com/en/US/products/hw/wireless/ps4555/products_administration_guide_book09186a008041ee01.html

http://www.cisco.com/en/US/products/ps6108/products_qanda_item0900aecd801b92cc.shtml

http://www.cisco.com/en/US/products/hw/switches/ps708/products_data_sheet09186a00802252b7.html

[gtelles]

Static WEP key is all we are using at this test stage. Clients range from Cisco a/b/g to Intel b/g Centrino clients, and even a couple of Cisco 350 clients.