06-27-2013 11:57 AM - edited 07-04-2021 12:18 AM
I have deployed a wireless network with the equipment above:
2 AIR-WLC2106-K9 Software Version/Emergency Image Version 7.0.235.0
2 AIR-WLC2112-K9 Software Version/Emergency Image Version 7.0.235.0
10 AIR-LAP1252AG-T-K9 Boot Version 12.4.18.1 Mini IOS Version 3.0.51.0 IOS Version 12.4(23c)JA5
8 AIR-LAP1131AG-A-K9 Boot Version 12.3.8.0 Mini IOS Version 3.0.51.0 IOS Version 12.4(23c)JA5
4 AIR-LAP1131AG-A-K9 Boot Version 12.3.7.1 Mini IOS Version 3.0.51.0 IOS Version 12.4(23c)JA5
1 AIR-CAP3502I-A-K9 Boot Version 12.4.23.0 Mini IOS Version 7.0.112.74 IOS Version 12.4(23c)JA5
Can not find WPA2 enterprise feature ?
Rosa
06-27-2013 12:19 PM
Hi
After you create your WLAN you would select 802.1x security and select wpa2. Enterprise requires a radius server. You can do wpa2 psk which doesn't require a radius server ..
Sent from Cisco Technical Support iPhone App
06-27-2013 12:44 PM
Thanks.
So, if wpa2 enterprise is required I must install a radius server and configure controllers to connect to it.
Should I use Security -> RADIUS Authentication Servers > New to configure ?
Rosa
06-27-2013 12:53 PM
Yes, but there I more than just setting up the radius server. For example, what eap will you use. What supplicant will be used .. Etc
The wlc can act as a radius server but has limited eap types.
To get you started read this example
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a0080665d18.shtml
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide