05-13-2015 08:23 AM - edited 07-05-2021 03:13 AM
Hi all,
I'm seeking some information for CMX FastLocate.
I know its supported on the WLC ver 8.0 and the MSE ver 8.0 but only in combination with the AP 3600 and 3700 + the WSM module.
Will it be available on the 2702 AP some how?
like:
- AP online serving clients.
- AP off-line > scanning data and RSSI and inform the MSE
- AP back online and serving clients
I'll guess its possible to go off/on-line in a few ms. without any big client issues.
Maybe in release 8.1.something?
Solved! Go to Solution.
06-10-2015 12:03 AM
Fast Locate is not yet supported on the 2700 AP in later releases
05-17-2015 11:49 AM
Any comments are welcome ;-)
05-18-2015 01:27 PM
currently Fastlocate requirements are 3600/3700 with WSM
05-18-2015 01:47 PM
Hi Saurav
Thanks for your reply.
"currently Fastlocate requirements are 3600/3700 with WSM"
I'm seeking info for "maybe supported on the 2700 AP in later releases"?
06-10-2015 12:03 AM
Fast Locate is not yet supported on the 2700 AP in later releases
06-10-2015 06:30 AM
Hi Abhishek
Thanks for the reply.
Do you know from which release?
02-03-2016 02:02 AM
Hi all,
CMX 10.2 seems supports fastlocate in 1700/2700 too, but I haven't tested it.
Take a look to this link:
http://www.cisco.com/c/en/us/td/docs/wireless/mse/10-2/cmx_config/b_cg_cmx102/b_cg_cmx102_chapter_010.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide