WSM FastLocate 3600 and 3700

[Finn Rud Laursen]

Hi all,

I'm seeking some information for CMX FastLocate.
I know its supported on the WLC ver 8.0 and the MSE ver 8.0 but only in combination with the AP 3600 and 3700 + the WSM module.

Will it be available on the 2702 AP some how?

like:

- AP online serving clients.
- AP off-line > scanning data and RSSI and inform the MSE
- AP back online and serving clients

I'll guess its possible to go off/on-line in a few ms. without any big client issues.
Maybe in release 8.1.something?

[Finn Rud Laursen]

Any comments are welcome ;-)

[Saurav Lodh]

currently Fastlocate requirements are 3600/3700 with WSM

[Finn Rud Laursen]

Hi Saurav

Thanks for your reply.
"currently Fastlocate requirements are 3600/3700 with WSM"

I'm seeking info for "maybe supported on the 2700 AP in later releases"?

[Abhishek Abhishek · Accepted solution]

Fast Locate is not yet supported on the 2700 AP in later releases

[Finn Rud Laursen]

Hi Abhishek

Thanks for the reply.
Do you know from which release?

[simone.donati17]

Hi all,

CMX 10.2 seems supports fastlocate in  1700/2700 too, but I haven't tested it.

Take a look to this link:

http://www.cisco.com/c/en/us/td/docs/wireless/mse/10-2/cmx_config/b_cg_cmx102/b_cg_cmx102_chapter_010.html