07-20-2020 04:36 AM - edited 07-20-2020 05:52 AM
Hello,
I upgraded new NCS5501-SE from 7.0.1 to 7.0.2 upgrade went smooth, but after doing last checks i see UPG-FAIL message is this something bad ?
RP/0/RP0/CPU0:ITXNCS01#show hw-module fpd Mon Jul 20 11:32:26.100 UTC FPD Versions ================= Location Card type HWver FPD device ATR Status Running Programd ----------------------------------------------------------------------------------- 0/RP0 NCS-5501-SE 1.1 MB-MIFPGA CURRENT 1.02 1.02 0/RP0 NCS-5501-SE 1.1 Bootloader CURRENT 1.22 1.22 0/RP0 NCS-5501-SE 1.1 CPU-IOFPGA UPGD FAIL 1.25 1.25 0/RP0 NCS-5501-SE 1.1 MB-IOFPGA CURRENT 1.11 1.11
How to fix it ? Thanks.
As I rememeber in 7.0.1 there was no error like that.
When tryingto di it manualy: upgrade hw-module location all fpd all
Getting this error:
0/RP0/ADMIN0:Jul 20 12:41:55.420 UTC: card_mgr[3087]: %DRIVER-CARD_MGR-1-UPGD_SKIP : FPD upgrade skipped for CPU-IOFPGA @location 0/RP0 .The Bootloader primary or golden version on the box is not compatible with the new packaged CPU-IOFPGA. Kindly 'force' upgrade the Bootloader prior to manually upgrading CPU-IOFPGA to avoid bricking the board
is it safe to do it this upgrade hw-module location all fpd all force command, as log suggests ?
Solved! Go to Solution.
10-24-2022 08:27 AM
Hi,
When you go to upgrade the router you can add the base packages and SMUs in the same command or multiple install add operations and then specify all the install IDs for each for install activate.
Sam
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide