Hello,
I upgraded new NCS5501-SE from 7.0.1 to 7.0.2 upgrade went smooth, but after doing last checks i see UPG-FAIL message is this something bad ?
RP/0/RP0/CPU0:ITXNCS01#show hw-module fpd
Mon Jul 20 11:32:26.100 UTC
FPD Versions
=================
Location Card type HWver FPD device ATR Status Running Programd
-----------------------------------------------------------------------------------
0/RP0 NCS-5501-SE 1.1 MB-MIFPGA CURRENT 1.02 1.02
0/RP0 NCS-5501-SE 1.1 Bootloader CURRENT 1.22 1.22
0/RP0 NCS-5501-SE 1.1 CPU-IOFPGA UPGD FAIL 1.25 1.25
0/RP0 NCS-5501-SE 1.1 MB-IOFPGA CURRENT 1.11 1.11 How to fix it ? Thanks.
As I rememeber in 7.0.1 there was no error like that.
When tryingto di it manualy: upgrade hw-module location all fpd all
Getting this error:
0/RP0/ADMIN0:Jul 20 12:41:55.420 UTC: card_mgr[3087]: %DRIVER-CARD_MGR-1-UPGD_SKIP : FPD upgrade skipped for CPU-IOFPGA @location 0/RP0 .The Bootloader primary or golden version on the box is not compatible with the new packaged CPU-IOFPGA. Kindly 'force' upgrade the Bootloader prior to manually upgrading CPU-IOFPGA to avoid bricking the board
is it safe to do it this upgrade hw-module location all fpd all force command, as log suggests ?
