hi
I have configure in ASR9006 BNG as below. This config is working when I use for single ip user . When I put Framed-IP-Netmask in radius for multible user ip session is up with interface none and can't use internet . Please check my issue .
Type Interface State User name
--------------------------------------------------------------------------------
IP:PKT No CD 122.248.105.4
RP/0/RSP0/CPU0:CISCO-BRAS1# sh subscriber session filter username 122.248.105.4 detail internal
Fri Dec 22 12:29:04.376 YGN
Interface: None
Circuit ID: Unknown
Remote ID: Unknown
Type: IP: Packet-trigger
IPv4 State: Up Pending, Fri Dec 22 12:28:52 2017
IPv4 Address: 122.248.105.4, VRF: default
Mac Address: 5404.a677.de2d
Account-Session Id: 006c4bc9
Nas-Port: Unknown
User name: 122.248.105.4
Formatted User name: unknown
Client User name: unknown
Outer VLAN ID: 105
Subscriber Label: 0x00000283
Created: Fri Dec 22 12:28:52 2017
State: Connected
Authentication: unauthenticated
Authorization: authorized
Ifhandle: 0x00000000
Session History ID: 0
Access-interface: Bundle-Ether1.105
SRG Flags: 0x00000000
Policy Executed:
event Session-Start match-first [at Fri Dec 22 12:28:52 2017]
class type control subscriber IP-105 do-until-failure [Succeeded]
10 activate dynamic-template IPOE_TPL-105 [cerr: No error][aaa: Success]
20 authorize aaa list AUTHOR-TESTING [cerr: No error][aaa: Success]
Session Accounting: disabled
Last COA request received: unavailable
User Profile received from AAA:
Attribute List: 0x1100e944
1: netmask len= 4 value= 255.255.255.252
2: sub-qos-policy-out len= 6 value= PM-12M
3: sub-qos-policy-in len= 6 value= PM-12M
4: accounting-list len= 12 value= ACCT-TESTING
5: acct-interval len= 4 value= 60(3c)
Pending Callbacks: Policy>SVM-PDone,
Services:
Name : IPOE_TPL-105
Service-ID : 0x4000021
Type : Template
Status : Request PD Association
-------------------------
[Event History]
Dec 22 12:28:52.192 IPv4 Start
Configuration
interface Loopback105
description 105-TEST
ipv4 address 122.248.105.1 255.255.255.0
interface Bundle-Ether1.105
ipv4 point-to-point
ipv4 unnumbered Loopback105
service-policy type control subscriber PUB-105
encapsulation dot1q 105
ipsubscriber ipv4 l2-connected
initiator unclassified-source
!
policy-map type control subscriber PUB-105
event session-start match-first
class type control subscriber IP-105 do-until-failure
10 activate dynamic-template IPOE_TPL-105
20 authorize aaa list AUTHOR-TESTING identifier source-address-ipv4 password cisco
!
!
end-policy-map
