ASR-9901 - tam_entropy process shutdown

[nesttech1]

We have upgraded the ASR-9901 with IOS XR Version 7.3.2 and are seeing these messages during the booting process

RP/0/RSP0/CPU0:Aug 30 21:32:37.010 UTC: tam_entropy[317]: %SECURITY-TAMSVCS-3-ENTROPY : Shutting down tam_entropy process for Software TAM based devices.

LC/0/0/CPU0:Aug  5 05:01:52.278 UTC: tam_entropy[257]: %SECURITY-TAMSVCS-3-ENTROPY : Shutting down tam_entropy process for Software TAM based devices.

Please let me know if there is a way to eliminate these error messages

Thank you.

[smilstea]

Is it constantly spamming these or causing an impact?

You can use logging suppression so they won't appear anymore. Let me know of you need an example different from the config guide.

Thanks,
Sam

[nesttech1]

These messages only appear during the booting sequence.  Once the router is up, these don't show up anymore.

This router is not yet in production, so I don't know if there is any specific impact that these messages will cause.

[nesttech1 · Accepted solution]

We have upgraded to the recommended IOS XR version 7.5.2 and these messages have gone away.

So this issue was specific to the IOS XR version 7.3.2