11-15-2016 02:31 AM
Hi all
i want to change a router 7609 with a ASR9000;
I enter configuration in the new router and when i switch on , the STM4 card doesn't work.
Below message error
LC/0/0/CPU0:Nov 14 23:26:13.729 : g_spa_0[206]: %L2-SONET_LOCAL-4-ALARM : SONET0/0/0/1: B2_TCA
LC/0/0/CPU0:Nov 14 23:26:21.989 : ifmgr[217]: %PKT_INFRA-LINK-3-UPDOWN : Interface POS0/0/0/1, changed state to Up
LC/0/0/CPU0:Nov 14 23:26:24.751 : g_spa_0[206]: %L2-SONET_LOCAL-4-ALARM : SONET0/0/0/1: B2_TCA cleared
The interface is up but the line protocole is down
interface POS0/0/0/1
ipv4 address 81.X.179.X 255.255.255.252
encapsulation ppp
load-interval 30
!
controller SONET0/0/0/1
path
overhead c2 207
scrambling disable
!
framing sdh
overhead s1s0 2
clock source internal
11-15-2016 11:05 PM
Hi Team,
Please collect the below CLI’s to get more clear on this.
Please also collect the same CLI’s on remote end router.
Thanks,
Krishna
11-15-2016 11:10 PM
Hi Team,
Please also let me know which version are you using.
Thanks,
Krishna
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide