12-03-2013 05:30 PM
Hello all, install a interface card in slot 1 on 0/3/CPU0, however with below error message, try reload the subslot 0/3/1, still can't power up. Do I need reboot the 0/3/CPU0 Mod 80 in order to bring up this module, or I missed something ?
MPA in bay 1 cannot be brought up as NP TM mode is incompatible with the card type.
Please perform aline card reload in order to bring this MPA module up[#0x1c9774a#]
NAME: "module 0/3/CPU0", DESCR: "80G Modular Linecard, Packet Transport Optimized"
PID: A9K-MOD80-TR , VID: V02, SN: FOC1635N4RA
NAME: "module 0/3/0", DESCR: "ASR 9000 4-port 10GE Modular Port Adapter"
PID: A9K-MPA-4X10GE , VID: V03, SN: FOC1645N267
NAME: "module mau 0/3/0/0", DESCR: "XFP"
PID: XFP-10GLR-OC192SR , VID: V04 , SN: ONT163504R3
NAME: "module mau 0/3/0/1", DESCR: "XFP"
PID: XFP-10GER-192IR+ , VID: V01 , SN: SPC155201SW
NAME: "module mau 0/3/0/2", DESCR: "XFP"
PID: XFP-10GER-192IR+ , VID: V01 , SN: SPC15510F5X
NAME: "module mau 0/3/0/3", DESCR: "XFP"
PID: XFP-10GER-192IR+ , VID: V01 , SN: SPC15510DBW
NAME: "module 0/3/1", DESCR: "Unknown: Invalid EEPROM"
PID: , VID: N/A, SN:
12-03-2013 05:48 PM
Hi,
What code are you running? 'show install active summary'
Are your FPDs up to date? 'admin show hw-mod fpd loc all'
Can you try reloading the LC (MOD80) with the MPAs already inserted?
Thanks,
Sam
12-03-2013 06:13 PM
Dear Sam,
Not yet reload the NOD80 as live traffic on MPA 0, just want to confirm if need to reload the MOD80 in order to bring the MPA 1 power up before schedule a maintenance window for that.
Here is the capture
#show install active summary
Wed Dec 4 10:09:04.703 HKT
Active Packages:
disk0:asr9k-px-4.2.0.CSCtz47970-1.0.0
disk0:asr9k-px-4.2.0.CSCty46761-1.0.0
disk0:asr9k-px-4.2.0.CSCty19939-1.0.0
disk0:asr9k-px-4.2.0.CSCtx89601-1.0.0
disk0:asr9k-px-4.2.0.CSCtx28089-1.0.0
disk0:asr9k-px-4.2.0.CSCtl84822-1.0.0
disk0:asr9k-optic-px-4.2.0
disk0:asr9k-mini-px-4.2.0
disk0:asr9k-k9sec-px-4.2.0
disk0:asr9k-px-4.2.0.CSCtw65376-1.0.0
disk0:asr9k-mpls-px-4.2.0
disk0:asr9k-px-4.2.0.CSCtu17119-1.0.0
disk0:asr9k-mgbl-px-4.2.0
disk0:asr9k-mcast-px-4.2.0
disk0:asr9k-px-4.2.0.CSCty91147-1.0.0
disk0:asr9k-px-4.2.0.CSCty48838-1.0.0
disk0:asr9k-px-4.2.0.CSCtt70239-1.0.0
disk0:asr9k-px-4.2.0.CSCtx29916-1.0.0
disk0:asr9k-px-4.2.0.CSCtz01257-1.0.0
disk0:asr9k-px-4.2.0.CSCty37179-1.0.0
disk0:asr9k-px-4.2.0.CSCtx21795-1.0.0
disk0:asr9k-fpd-px-4.2.0
disk0:asr9k-px-4.2.0.CSCtz35514-1.0.0
#admin show hw-module fpd location all
Wed Dec 4 10:10:00.828 HKT
===================================== ==========================================
Existing Field Programmable Devices
==========================================
HW Current SW Upg/
Location Card Type Version Type Subtype Inst Version Dng?
============ ======================== ======= ==== ======= ==== =========== ====
0/RSP0/CPU0 A9K-RSP440-TR 1.0 lc cbc 0 16.114 No
lc fpga2 0 0.08 No
lc fpga3 0 4.09 No
lc fpga1 0 0.09 No
lc rommon 0 0.46 No
----------------------------------------------------------------------------------------------------------
0/RSP0/CPU0 ASR-9010-FAN 1.0 lc cbc 1 4.00 No
----------------------------------------------------------------------------------------------------------
0/RSP0/CPU0 ASR-9010-FAN 1.0 lc cbc 2 4.00 No
----------------------------------------------------------------------------------------------------------
0/RSP1/CPU0 A9K-RSP440-TR 1.0 lc cbc 0 16.114 No
lc fpga1 0 0.09 No
lc fpga2 0 0.08 No
lc fpga3 0 4.09 No
lc rommon 0 0.46 No
----------------------------------------------------------------------------------------------------------
0/0/CPU0 A9K-MOD80-TR 1.0 lc cbc 0 20.113 No
lc fpga2 0 0.05 No
lc fpga4 0 0.06 No
lc rommon 0 1.23 No
----------------------------------------------------------------------------------------------------------
0/0/0 A9K-MPA-20X1GE 1.0 spa fpga3 0 0.08 No
----------------------------------------------------------------------------------------------------------
0/0/1 A9K-MPA-4X10GE 1.0 spa fpga6 1 0.09 No
----------------------------------------------------------------------------------------------------------
0/1/CPU0 A9K-MOD80-TR 1.0 lc cbc 0 20.113 No
lc fpga2 0 0.05 No
lc fpga4 0 0.06 No
lc rommon 0 1.23 No
----------------------------------------------------------------------------------------------------------
0/1/0 A9K-MPA-4X10GE 1.0 spa fpga6 0 0.09 No
----------------------------------------------------------------------------------------------------------
0/1/1 A9K-MPA-4X10GE 1.0 spa fpga6 1 0.09 No
----------------------------------------------------------------------------------------------------------
0/2/CPU0 A9K-MOD80-TR 1.0 lc cbc 0 20.113 No
lc fpga2 0 0.05 No
lc fpga4 0 0.06 No
lc rommon 0 1.23 No
----------------------------------------------------------------------------------------------------------
0/2/0 A9K-MPA-4X10GE 1.0 spa fpga6 0 0.09 No
----------------------------------------------------------------------------------------------------------
0/2/1 A9K-MPA-4X10GE 1.0 spa fpga6 1 0.09 No
----------------------------------------------------------------------------------------------------------
0/3/CPU0 A9K-MOD80-TR 1.0 lc cbc 0 20.115 No
lc fpga2 0 0.05 No
lc fpga4 0 0.06 No
lc rommon 0 1.28 No
----------------------------------------------------------------------------------------------------------
0/3/0 A9K-MPA-4X10GE 1.101 spa fpga6 0 0.09 No
----------------------------------------------------------------------------------------------------------
12-04-2013 04:44 AM
Hi,
Yes this was an issue which got corrected between 4.2.0 and 4.2.1 so a reload as I mentioned will need to be done. If you want to upgrade so that this and other issues are fixed I would recommend 4.3.4 when it comes out in about a week, the other good option is 4.2.3 (with SMU pack 3).
Thanks,
Sam
12-04-2013 05:07 PM
Dear Sam,
Thanks the advice.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide