Hi
We used to do this on Juniper with below config
Herewith providing juniper config
so-2/1/0 {
encapsulation ppp-tcc;
unit 0 {
}
}
}
ge-5/0/0 {
per-unit-scheduler;
vlan-tagging;
mtu 9192;
encapsulation flexible-ethernet-services;
unit 40 {
encapsulation vlan-tcc;
vlan-id 40;
family tcc {
proxy {
inet-address 194.170.102.46;
}
remote {
inet-address 194.170.102.45;
mac-address 64:16:8d:28:eb:60;
}
}
}
}
}
}
show configuration protocols connections
interface-switch GE-to-SONET {
interface so-2/1/0.0;
interface ge-5/0/0.40;
}
So as per configuration we are able to provide L2VPN on same box with cust connected to so-2/1/0. 0 and another cust connected to ge-5/0/0
I have prepared below configuration for IOS-XR, can anyone confirm same would work or do I need any other commands too on CE?
int gig 0/0/0/1 l2transport
int pos 0/2/0/1 l2transport
encapsulation ppp
l2vpn
xconnect group grp1
p2p gr1
interworking ipv4
interface TenGigE 1/1/1/1 PW-IP
interface pos 0/2/0/1 PW-IP
Regards
Sameer Shah