cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
459
Views
0
Helpful
1
Replies

[IOS XR] Part 2 of 2 (activate software): Failed

Hi guys, good morning. Could you, as far as possible, help me with the question below?

 

- Command: admin install add disk0:/asr9k-px-6.4.2.CSCvr78185.pie activate synchronous

- Hash md5 is correct. File not corrupted;

 

Log:

RP/0/RSP0/CPU0:RTDXX#admin show install log 25 verbose
Thu Aug 5 09:41:24.399 UTC

Install operation 25 started by user '<USER>' via CLI at 01:09:21 UTC Thu Aug 05 2021.
(admin) install add /disk0:/asr9k-px-6.4.2.CSCvr78185.pie activate synchronous
Install operation 25 completed with failure at 01:11:15 UTC Thu Aug 05 2021.

Install logs:
Install operation 25 '(admin) install add /disk0:/asr9k-px-6.4.2.CSCvr78185.pie activate synchronous' started by user '<USER>' via CLI at 01:09:21 UTC Thu Aug 05
2021.
Part 1 of 2 (add software): Started
Info: The following package is now available to be activated:
Info:
Info: disk0:asr9k-px-6.4.2.CSCvr78185-1.0.0
Info:
Info: The package can be activated across the entire router.
Info:
Part 1 of 2 (add software): Completed successfully
Part 2 of 2 (activate software): Started
Info: After this install operation, some SMU package(s) are fully/partially superceded. The fully superseded SMUs can found using CLI: 'show install
Info: superceded'. If found those can be deactivated using CLI: 'install deactivate superceded'.
Info: Install Method: Parallel Process Restart
Install operation 25: load phase started at 01:10:29 UTC Thu Aug 05 2021.
Error: The install completed however system error happened after the point at which the install operation could be aborted.
Error:
Error: ERROR: Node responded with an error when completing the change of running software via System Manager. (Details: 'Package File System' detected the
Error: 'fatal' condition 'can't acquire an internal lock': Invalid argument)
Error: AFFECTED NODE(S): 0/RSP0/CPU0
Error: TECH SUPPORT:
Error: Please collect diagnostic information using '(admin) show tech-support install'
Info: The changes made to software configurations will not be persistent across system reloads. Use the command '(admin) install commit' to make changes
Info: persistent.
Info: Please verify that the system is consistent following the software change using the following commands:
Info: show system verify
Info: install verify packages
Part 2 of 2 (activate software): Failed. Error information available as part of command output above. For more information see '(admin) show install log 25'
Part 1 of 2 (add software): Completed successfully
Part 2 of 2 (activate software): Failed. Error information available as part of command output above. For more information see '(admin) show install log 25'
Install operation 25 completed with failure at 01:11:15 UTC Thu Aug 05 2021.

Summary:
Sub-operation 1:
Started at: 01:10:29 UTC Thu Aug 05 2021
Install method: Parallel Process Restart
Summary of changes on nodes 0/RSP0/CPU0, 0/RSP1/CPU0:
Activated: iosxr-fwding-6.4.2.CSCvr78185-1.0.0
Impacted: iosxr-mcast-6.4.2
1 iosxr-fwding-6.4.2.CSCvr78185 processes affected (1 updated, 0 added, 0 removed, 0 impacted)

Summary of changes on nodes 0/0/CPU0, 0/1/CPU0, 0/2/CPU0:
Activated: iosxr-fwding-6.4.2.CSCvr78185-1.0.0
1 iosxr-fwding-6.4.2.CSCvr78185 processes affected (1 updated, 0 added, 0 removed, 0 impacted)

Summary of changes on node 0/3/CPU0:
Activated: iosxr-fwding-6.4.2.CSCvr78185-1.0.0
1 iosxr-fwding-6.4.2.CSCvr78185 processes affected (1 updated, 0 added, 0 removed, 0 impacted)

Installation changes:
Sub-operation 1:

Installation changes on nodes 0/RSP0/CPU0, 0/RSP1/CPU0:
Replacing and restarting process: cdp
Replacing DLL: libmrib6_hash.dll
Replacing DLL: libmrib_hash.dll
Replacing file: cdp_cmds.parser
Replacing file: cdpmib_cmds.parser

Installation changes on nodes 0/0/CPU0, 0/1/CPU0, 0/2/CPU0:
Replacing and restarting process: cdp

Installation changes on node 0/3/CPU0:
Replacing and restarting process: cdp

Installation impact details:
Sub-operation 1:
Output format:
<Level> (<Impact>:<Note>) <Name> <Type>[package:component]
Level : the distance from the process along the DLL dependency chain
Impact : a one character indication of how this server or DLL is impacted:
C modified; A added; R removed; I impacted by its dependencies
Note : blank, or one of these annotations:
d duplicate (this DLL has already been listed previously for this process)
s self-managing (this server self-manages changes in its dependencies
Name : the name of this server or DLL
Type : "server" or "DLL"
Package : the Package containing this server or DLL
Component: the source code component containing this server or DLL

Node class: CRS-RP-X86
2 nodes: 0/RSP0/CPU0, 0/RSP1/CPU0
1 Changed or Impacted Servers that will be restarted
0 (C: ) cdp server [iosxr-fwding-6.4.2.CSCvr78185:cdp.x86e]

Node class: NP200-MOD-SMEM
3 nodes: 0/0/CPU0, 0/1/CPU0, 0/2/CPU0
1 Changed or Impacted Servers that will be restarted
0 (C: ) cdp server [iosxr-fwding-6.4.2.CSCvr78185:cdp]

Node class: A9K-TOMAHAWK
1 node: 0/3/CPU0
1 Changed or Impacted Servers that will be restarted
0 (C: ) cdp server [iosxr-fwding-6.4.2.CSCvr78185:cdp.x86e]

--------------------------------------------------------------------------------

RP/0/RSP0/CPU0:RTDXX#

1 Reply 1

smilstea
Cisco Employee
Cisco Employee

When we go to activate software we get a config lock so no further commits can happen, its a safeguard. It looks like the config is either in an inconsistent state or another user/session was using the config lock (config exclusive is the biggest cause of this). We can also do a clear configuration inconsistency.

 

Sam

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: