XR OS and Platforms

HI allOur GSR40/8 device occur these error message all the time.I tried to search message in cisco documents,but cannot find anything about this issue.Could you tell me how is it ? Here are error message as below."syslog_dev[88]: redstatsd[383]: read...

I attempted to setup BFD on a layer3 subint on an ethernet bundle on an ASR9K cluster with two members.  The other end of the link is a ME3600X.  The BFD session did not come up, the status on the ASR side was 'ADMIN DOWN', I also saw log messages of...

Hi guys, Happy New year and all the best! We have an issue that came up recently.A few months back we have a new backup solution for our network gear (more or less based on rancid) that uses ssh to login to the devices, do a few show outputs, and gre...

ASR9000 lldp cannot recognize switch VFT lightsmart V2224G-OP, but the VFT switch can recognize the ASR9000 with all the available TLV. I also have some alcatel switch in the network and lldp between ASR9k and Alcatel switch seems to be working toget...

I have the following BGP setup between CEL7 and SP1R2: hostname SP1R2 ! router bgp 3356 bgp router-id 33.56.2.2 address-family ipv4 unicast maximum-paths ebgp 8 network 33.56.2.2/32 aggregate-address 33.56.0.0/16 summary-only redistribute c...

HI， GSR12000Ver 4.3.4Does anyone know the reason for the following log? How should it be solved?fib_mgr[158]: %L2-TCAM_RM-3-TCAM_RM_RECVD_REPLY_NOMEM : tcam_rm: TCAM could not satisfy allocation request, the node may not function as expected. : pkg/...

Current set up is A903 with 2 X RSP3C-200-S.  RP0 has image but RP1 has older image.  Anyway to make them sync like ASR9000?  

Hello Friends. I have a question about the A9K package. The contents of Active and Committed pkgs on A9K devices are different, such as the following states:Active Packages: disk0:asr9k-px-4.3.4.CSCut30136-1.0.0 disk0:asr9k-bng-px-4.3.4 d...

Hello Friends Our device occur this error message, and it shows serverl times per hour.LC/0/6/CPU0:Dec 18 05:30:40 : pfm_node_lc[298]: %PLATFORM-CROSSBAR-1-SERDES_ERROR_LNK1 : Set|fab_xbar[168017]|Crossbar Switch(0x1017007)|Slot_5_XBAR_0 LC/0/6/CPU0...

"I inserted a new A9K-24X10GE-TR line card today, which prompted the following errors: RP/0/RSP1/CPU0:Jul 21 22:26:39.997 : pfm_node_rp[357]: %PLATFORM-CROSSBAR-1-SERDES_ERROR_LNK1 : Set|fab_xbar[213105]|0x1017007|XBAR_0_Slot_3 RP/0/RSP1/CPU0:Jul 21...

Hello,We just implemented mvpn for ipv4 traffic in ASR9K successfully but now we need same thing for ipv6. After doing all configuration we saw type 1 and type 7 route propagated and control plane looks ok but we don’t receive any traffic. Look like ...