line default vs line console

[from88]

Hello,

I'm quite old ios-xr user. But still i'm not sure if my thinking is correct. Is it true that line default also activates the same configuration  for console even if line console is not configured ?

For example i'm using this command to ensure that local users are only working if radius is down:

aaa authorization exec AUTH_VTY group RADIUS_GROUP local
aaa authentication login VTY group RADIUS_GROUP local

!
line default
authorization exec AUTH_VTY
login authentication VTY
!

So, do i understand correctly that if i will not configure line console, it will inherit the configuration from line default ? Or should i define line console explicitly to configure same access behaviour - first radius, and only then local.

Thank you !

[ammahend]

Refer to this post

https://community.cisco.com/t5/routing/ios-xr-line-console-configurations/td-p/3920559

[from88]

thank you, i already checked that post, i need someone's confirmation if it differs or not. Because in the practice line default configuration  seems like to applies on console line, without using line console.