Lots of dumper syslog messages, even the disk usage is OK

[from88]

hello,

On my NCS 5501-SE 7.0.2 im getting lots of syslog messages:

0/RP0/ADMIN0:Jul 20 21:48:59.672 UTC: dumper[2585]: %INFRA-CALVADOS_DUMPER-6-HOST_COPY_FAIL : Copy file /misc/scratch/core/default-sdr--2.20200720-182553.core.0_RP0.lxcdump.tar.lz4 to 0/RP0 failed   
0/RP0/ADMIN0:Jul 20 21:49:14.275 UTC: dumper[2585]: %INFRA-CALVADOS_DUMPER-6-HOST_COPY_FAIL : Copy file /misc/scratch/core/default-sdr--2.20200720-182553.core.0_RP0.lxcdump.tar.lz4 to 0/RP0 failed   
0/RP0/ADMIN0:Jul 20 21:49:28.915 UTC: dumper[2585]: %INFRA-CALVADOS_DUMPER-6-HOST_COPY_FAIL : Copy file /misc/scratch/core/default-sdr--2.20200720-182553.core.0_RP0.lxcdump.tar.lz4 to 0/RP0 failed   
0/RP0/ADMIN0:Jul 20 21:49:40.041 UTC: wd_diskmon[2653]: %INFRA-WD_DISKMON_SYSADMIN-2-DISK_CRIT : Sysadmin: Device: /misc/disk1 Usage %: 100, State: CRITICAL, CRITICAL Threshold %: 95  
0/RP0/ADMIN0:Jul 20 21:49:43.496 UTC: dumper[2585]: %INFRA-CALVADOS_DUMPER-6-HOST_COPY_FAIL : Copy file /misc/scratch/core/default-sdr--2.20200720-182553.core.0_RP0.lxcdump.tar.lz4 to 0/RP0 failed 

even my disk space is ok:

RP/0/RP0/CPU0:ITXNCS01# show  media 
Mon Jul 20 21:51:43.705 UTC

Media Information for local node.

----------------------------------------------
Partition                    Size     Used  Percent    Avail
rootfs:                      3.9G     1.2G      32%     2.6G
apphost:                     3.7G     106M       3%     3.4G
/dev/sde                     969M     421M      47%     482M
harddisk:                    5.6G     1.7G      32%     3.7G
log:                         459M      46M      11%     379M
config:                      459M     2.1M       1%     423M
disk0:                       2.0G      23M       2%     1.8G
---------------------------------------------------
rootfs: = root file system (read-only)
log: = system log files (read-only)
config: = configuration storage (read-only)
RP/0/RP0/CPU0:ITXNCS01#

Any suggestions ?

It even goes to show alarms windows:

show alarms:

CALV/SW_MISC_ERR/12#OTHER/SW_PROCESS/2653CALV/SW_MISC_ERR/12#OTHER/SW_PROCESS/2653Disk space alert for location "Sysadmin:/misc/disk1"0/RP0CALV/SW_MISC_ERR/12FAM_FAULT_TAG_SYSADMIN_DISK_DISK1N/AOTHER/SW_PROCESS/2653falseCriticalSetSoftware07/20/2020 16:37:40 UTC1595263060-0NotServiceAffectingNotSpecifiedNearEndFalse--NotSpecifiedN/ADISK1-DISK-SPACEDefault

Thanks

[smilstea]

It is complaining about space in sysadmin (admin mode).

I would recommend opening a TAC case to investigate the crashes of the lxc.

Sam

[from88 · Accepted solution]

thanks, as the support suggested, it could be due to reload command usage. They said, that on NCS devices we need to use reload location all.

[xXAzazelXx]

Can you please let me know what commands you used to clear the space and resolve this?

Or did you literally just rebooted it with "reload location all" and that's it.