Hi experts:
Looking for some help.... I recently upgraded 2 equipments from IOS XR 4.2.3 to 6.1.3 and found an issue with FPD at PS.
I was not able to Upgrade FPD for PS
After execute general and particular FPD process, problem remains even FPD states upgrade process was done ..!!
I turned them off by switch and finallly re-seat all PS with not success.
RP/0/RSP0/CPU0:ASR9K#admin show hw-module fpd location all
§ Mon May 15 05:36:26.582 DST
==========================================
§ Existing Field Programmable Devices
§ ==========================================
HW Current SW Upg/
0/PS0/M0/SP PWR-2KW-DC-V2 1.0 pm fpga11 13 6.03^ No
pm fpga12 13 6.02^ Yes
pm fpga13 13 6.02^ No
--------------------------------------------------------------------------------
0/PS0/M1/SP PWR-2KW-DC-V2 1.0 pm fpga11 14 6.02^ Yes
pm fpga12 14 6.02^ Yes
pm fpga13 14 6.02^ No
--------------------------------------------------------------------------------
0/PS1/M0/SP PWR-2KW-DC-V2 1.0 pm fpga11 17 6.02^ Yes
pm fpga12 17 6.02^ Yes
pm fpga13 17 6.02^ No
--------------------------------------------------------------------------------
0/PS1/M1/SP PWR-2KW-DC-V2 1.0 pm fpga11 18 6.02^ Yes
pm fpga12 18 6.02^ Yes
pm fpga13 18 6.02^ No
Any insigth is really appreciate
Regards
Juan Carlos
