I have configured below configuration on NCS 540 Router for receiving dying-gasp snmp trap messages at my EPNM tool. Unfortunately I am not receiving any alert at EPNM tool during power outage but normal snmp traps alerts are receiving at EPNM. However the router shows that the dying-gasp alerts generated.
Am I missing something??
Configuration:
snmp-server host 172.XX.XX.XXX traps version 2c ******* dying-gasp
Output:
RP/0/RP0/CPU0:XXX-XXX-XXX-540-01#show snmp trace dying-gasp
Fri Dec 22 16:02:57.806 IST
Entering snmp_ltrace main....
116 wrapping entries (128 possible, 0 filtered, 147 total)
Dec 15 05:49:51.637 snmp/dying-gasp 0/RP0/CPU0 t7296 make_dying_gasp_trap:Successfully generated trap for index:0 opcode:2 length:104
Dec 15 05:49:51.637 snmp/dying-gasp 0/RP0/CPU0 t7296 make_dying_gasp_trap:Successfully generated trap for index:1 opcode:2 length:104
Dec 15 05:49:51.640 snmp/dying-gasp 0/RP0/CPU0 t7296 make_dying_gasp_trap:Successfully generated trap for index:2 opcode:2 length:10