Dears
when enable access-group and service policy in the interface, how to process it ? who has higher priority ?
for example:
interface Bundle-Ether4
service-policy input test
service-policy output test
ipv4 address x.x.x.x 255.255.255.252
ipv4 access-group test ingress
ipv4 access-group test egress
policy-map test
class 1
set dscp default
police rate per-million 100
conform-action transmit
exceed-action drop
class-map match-any 1
match access-group 1
end-class-map
ipv4 access-list 1
10 permit udp any any eq 1900
20 permit udp any eq 1900 any
ipv4 access-list test
10 permit ipv4 any host x.x.x.x fragments
20 deny ipv4 any x.x.x.x 0.0.0.255 fragments
30 deny ipv4 any x.x.x.0 0.0.0.63 fragments
40 permit ipv4 any host x.x.x.x fragments
50 permit ipv4 any x.x.x.x 0.0.0.31 fragments
60 deny ipv4 any x.x.x.0 0.0.0.255 fragments
70 permit ipv4 any x.x.x.x 0.0.0.31 fragments
80 deny ipv4 any x.x.x.x 0.0.0.255 fragments
90 deny ipv4 any x.x.x.x 0.0.0.255 fragments
