09-05-2025 02:08 AM
Hi,
I have an on prem server up and running
It appears that the only way I can get a successful registration is to disable crl revocation check - this sounds wrong, even if it appears to be documented in some cisco guides.
So I need some help with some questions:
My config as follows
call-home
service active
contact smart-licensing
profile CiscoTAC-1
active
destination address http https://onprem-fqdn/Transportgateway/services/RouterRequestHandler
destination transport-method email disable
destination transport-method http
!
http client source-interface ipv4 Loopback0
license smart flexible-consumption enable
thanks for your help
Mark
09-05-2025 03:45 AM
the config seems to be correct, what is the issue? does the device not able to get License from CSSM ?
09-05-2025 06:06 AM
Hi
thanks for the response - the issue should be fairly clear in my original post but let me know if you need further detail
Mark
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide