cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1779
Views
10
Helpful
2
Replies
Ronie Meireles
Beginner

SNMP Walk don't get IfName of Lots of Interfaces

Hello dear Specialists,

I am facing a problem with a ASR9010 with IOS XR 4.2.3 that is preventing me from monitoring major of the Ethernet Interfaces with SNMP Walk.

Though the router posseses IfMIB iso.3.6.1.2.1.2.2.1.2 and have created the correspondings IfIndex and IfName, it is impossible to get them with the commandds snmpwalk -v 2c -c public or snmpwalk -v 2c -c public Name iso.3.6.1.2.1.2.2.1.2.IfIndex from the server. Only two Ethernet interfaces, tunnel-interfaces and sub-interfaces (only Bunddles in this case) return in the output. 

 

server~$ snmpwalk -v 2c -c public rdistcta5 iso.3.6.1.2.1.2.2.1.2

iso.3.6.1.2.1.2.2.1.2.41 = STRING: "GigabitEthernet0/6/0/13"
iso.3.6.1.2.1.2.2.1.2.298 = STRING: "TenGigE0/4/0/3"
iso.3.6.1.2.1.2.2.1.2.306 = STRING: "Bundle-Ether7.88"
iso.3.6.1.2.1.2.2.1.2.358 = STRING: "tunnel-te41"
iso.3.6.1.2.1.2.2.1.2.490 = STRING: "Bundle-Ether8.2192"....

 

 

ASR9k#sh snmp interface | i GigabitEthernet 
Wed Apr 15 16:56:25.123 BRGMT
...
ifName : GigabitEthernet0/6/0/2  ifIndex : 30
ifName : GigabitEthernet0/6/0/3  ifIndex : 31
ifName : GigabitEthernet0/6/0/4  ifIndex : 32
ifName : GigabitEthernet0/6/0/5  ifIndex : 33
ifName : GigabitEthernet0/6/0/6  ifIndex : 34
ifName : GigabitEthernet0/6/0/7  ifIndex : 35

 

server~$ snmpwalk -v 2c -c public rdistcta5 iso.3.6.1.2.1.2.2.1.2.35
iso.3.6.1.2.1.2.2.1.2.35 = No Such Instance currently exists at this OID

 

I beg your precious opinions.

 

Thanks in advance

 

Best Regards,

 

Ronie

2 ACCEPTED SOLUTIONS

Accepted Solutions
Rivalino Tamaela
Cisco Employee

Hi,

You can try to restart mibd_interface process, which is not service impacting:

- process restart mibd_interface

 

thanks,

rivalino

 

View solution in original post

somphong.p
Beginner

Restart Process.

(admin)#Process restart snmpd

(admin)#process restart mibd_entity

(admin)#process restart mibd_interface

View solution in original post

2 REPLIES 2
Rivalino Tamaela
Cisco Employee

Hi,

You can try to restart mibd_interface process, which is not service impacting:

- process restart mibd_interface

 

thanks,

rivalino

 

View solution in original post

somphong.p
Beginner

Restart Process.

(admin)#Process restart snmpd

(admin)#process restart mibd_entity

(admin)#process restart mibd_interface

View solution in original post

Content for Community-Ad