Join the ACI conversation. Jump into this space for access to peers and industry experts. You’ll find the latest updates, helpful resources, and assistance when you need it.
I see questions that have been posted for months in the Cisco ACI Community without a response. Seems kinda pointless to ask if Cisco is not monitoring to provide or attempt to answer. admin
Hello Community,
Our ACI starter-kit was working fine until i decided to do a factory reset and start the config again from the scratch.
My problem now is that our leaf switches are not discovered anymore by the apic did some check and i can confirm...
Hi All,
I have an urgent requirement, please assist me to figure out a way.
In ACI I have configured 5 EPGs in 5 BDs respectively in single tenant/ single VRF. In those EPGs vlans may be reused as well. Is it possible to extend the traffic to exte...
Hello,
I'm wondering something about L3out created in common tenant.
We've created 3 different L3 out in common tenant :
L3out-Number1- Security 1
L3out-Number2- Security 2
L3out-Number3- Security 3
It seems that from each new tenant, we could use...
Having challenge is Discovering the nodes. After multiple reboot of ACI & Leaf I managed to register a directly connected leaf. However it took more than an hour to get IP address. Now registered Spine but discovery in progress for almost an hour.
D...
We have some equipment available to build a learning environment but the only leaf switch available is the 40G N9K-C9332PQ. The APICs have 10G VIC cards so the only physical option is to use a break out cable but I cannot configure the leaf switch in...
Hi Guys ,
I'm sorry in advance for my disordered question . i'm just feel lost in this field of ACI .
I'm reading articles/guides and watching videos, but, when coming to the real thing, i think i need some human guidance, and that's why i'm writing ...
Hi,I'm currently running the 2.1(1h) in production with 9936 Spine / 93xxx-EX.
For a specific tenant, my customer wants to filter traffic between each vlan through an external firewall as you can see attached.
I would like to find the easiest way to ...
Hello,
I've read (and checked in our fabric) that there's no IP EP Learning on infra VLAN, and I would like to know the reason for this behaviour. I've looked for it into the documentation but I haven't found an explanation.
In this case, when only...
Hello,
How could I configure a interface policy using an access port with spanning tree edge/port-fast ?
didn' not find the policies under access policies
thanks for your help
FD.
Hi,
I have an EPG configured in a User Tenant with a requirement to access a DHCP server located Externally over a L3Out. The EPG and L3Out are both in the same Tenant-VRF.
I have created a DHCP Relay Provider within the User Tenant with the EPG type...
Good afternoon,
Are there any issues configuring ACI to use SNMP V3. The SNMP management station can poll the ACI APIC's when configured to use V2.
However the APIC's do not respond to management polls when configured to use SNMP V2.
Any help appreci...
Hello Community,
I think this feature has been requested somewhere, I hope to put more traction to Cisco Dev to provide an effective way to find ALL EPGs that an interface is associate with.
As we are moving from traditional network to ACI, the num...
