Interface range in ACI

[Fernando Hernández]

Hello.
Is there a command / way to use an "interface range" in ACI to shutdown a range of end devices Leaf interfaces or no shutdown interfaces?

[Sergiu.Daniluk]

HI @Fernando Hernández 

You can access the NXOS vsh to shutdown a range of interfaces, however, the only drawback of this method is that it will not be reflected in APIC GUI:

Leaf1201# vsh
Leaf1201# configure
Leaf1201(config)# interface e1/3-4
Leaf1201(config-if-range)# where
  conf; interface Ethernet1/3-4      root@Leaf1201
Leaf1201(config-if-range)# shutdown

Stay safe,

Sergiu

[tawa-ndafa · Accepted solution]

apic-01# conf t
apic-01(config)# leaf 101-102
apic-01(config-leaf)# interface ethernet 1/1-48
apic-01(config-leaf-if)# shutdown

[Vishalhathi · Accepted solution]

Hello Fernando,

you can do it with APIC.

apic1# configure
apic1(config)# leaf 101
apic1(config-leaf)# interface ethernet 1/2-5
apic1(config-leaf)# shutdown.

 Regards,

Vishal