Application Networking

ACE30 - SSL chunked encoding truncated

Found an issue with our ACE 30 modules when using SSL termination and SSL client intiation on TCP port 8443.We have configured a VIP (class-map) for in bound traffic on port 8443. We use two serverfarms in an active backup config in the load balancer...

Ace url

Hi, I have two servers to be balanced on port 80, but I received a request, from the team that makes the maintenance of these servers, to when anyone introduce a specific url, the access is always made through the same server.This can be done? I have...

Resolved! ANM Virtual Appliance - SCP, TFTP or SFTP Support

Good day all,I would just like to know if, as part of the back-up configuration supported on ANM 5.2, to back-up the ACE configurations, licenses, etc., and then have them copied to another system via SCP, SFTP or TFTP, is this supported to have thes...

ACE4710 started to continuously reboot

Hi, one of our 2 ACE boxes in FT group suddenly reboot-ed from active state and now it continuously reboots with the following error:insmod: error inserting '/isan/bin/klm_octeon_device.klm': -1 No such deviceerror inserting /isan/bin/klm_octeon_devi...

Cisco ACE-10, SCP ping

I got this message in kernel log:901001 <1>May 9 23:22:46 kernel: Initialising SCP ping receive time Around that time the ACE stopped loadbalancing. After reboot, it startet to work again.Cannot find any info og this message, what does it mean?BrGe...

Ace 4710 - same context routed and load-sharing

Hi AllCan an ACE 4710 have , in the same context - servers which area. just being routed tob. a set of load-shared serversI have been told you may not be able to do this on this versionDoes anyone know if this is correctThanksSteve

Resolved! ACE redirect to different URI on rserver

We use JDE and up to now part of the tools was Apache which would redirect as followshttp://alias.server to http://real.server:13333/main.maf the latest version no longer uses Apache so I was wondering how I can do it on the ACEof cours...

Resolved! Waas Setup Clarification

I am new to Waas and I would like some clarification on my setupI have 3 * 574 devices and a CM (see diagram)One device is remote and inline- Site 3I have a Management device and an application accelerator at site 1I have a an application accelerator...

Resolved! write mem command on ACE

Does ACE , automatically save the running config to startup config ,or I need save the config on the primary whenever I make changes .As till date I thought that the config will be saved automatically ,until I ran into an issues.Had setup my ACE ...

Resolved! WAAS Placement & Egress method

We have Cisco WAAS deployed Our Enviornment.We are using wccp gre as return & redirection method.We are using the default egress method which is IP forwarding with of all our offsite routers.Our smaller site Offsite routers are configured as LAN on s...

ACE Sharepoint Setup/Keep getting IIS Splash Page

I have setup load-balancing on an ACE 4710 for HTTP for Sharepoint 2010. The Server Admin says that the IIS server will recognize the right site by DNS name. Problem is I have no clue how to make sure the servers get the DNS name passed to them. They...

Resolved! SSL offloading with .p7b file possibility?

Hi,I am trying to install SSL certificates in ACE for my exchange servers in a serverfarm. I have recieved cert file from AD admin in .p7b format. I have not recieved any key file. Please clarify whether ACE supports SSL offloading with .p7b format. ...

Resolved! CSM Multiple bridged Client-Server Pairs

Hi,We have a CSM working in a classical single subnet bridge mode.Now we need to add another Client-Server bridge pair in the same module.Since its operational, i am a bit reluctant to do any testing on this.Need your inouts on whether this is feasib...

Flash Memory for ACE 4710?

Question from one of my customers on if there is a Flash Memory upgrade option for the ACE4710 that they have.He says he needs more memory so that he can have two images on flash at once. From what I can find, there does not seem to be an upgrade op...

Resolved! Why associate more than one probe to a serverfarm

Hi,Can someone describe a case in which is needed to configure a serverfarm with more than one probe associate to it?Moreover is not clear for me what can happen in case of fails of a single probe. Will it be that all serverfarm will be out fo servic...

Application Networking

Forum Posts

ACE30 - SSL chunked encoding truncated

Ace url

Resolved! ANM Virtual Appliance - SCP, TFTP or SFTP Support

ACE4710 started to continuously reboot

Cisco ACE-10, SCP ping

Ace 4710 - same context routed and load-sharing

Resolved! ACE redirect to different URI on rserver

Resolved! Waas Setup Clarification

Resolved! write mem command on ACE

Resolved! WAAS Placement & Egress method

ACE Sharepoint Setup/Keep getting IIS Splash Page

Resolved! SSL offloading with .p7b file possibility?

Resolved! CSM Multiple bridged Client-Server Pairs

Flash Memory for ACE 4710?

Resolved! Why associate more than one probe to a serverfarm

ECCN, HTS/EU Taric & COO codes for products

VxLAN EVPN Multisite behavior for extended Vlans

DNAC node clusters on different subnets

WAE choses wrong loopback when building its IGP.

software-defined networks and software-defined data centers

Replace A9K-24X10GE-1G-TR

ITD for servers LB on the same vlan

ACE module configuring NTP

cisco prime server

WAAS TCP Resets