Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,We are facing a problem with the HTTP probe configuration on the ACE4710 appliance, below is the configuration we are using;probe http Portal-HTTP-Probe interval 5 passdetect interval 2 passdetect count 2 receive 20 request method get ur...
Hi,We've configured SSL offloading on a VIP...policy-map multi-match VIPS-VLANxxx class VIP-X.X.X.X-443 loadbalance vip inservice loadbalance policy POLICY-X.X.X.X-443 loadbalance vip icmp-reply active ssl-proxy server star.blah.comssl-p...
Hi,Is there a way to program a 612 to automatically close down TFO connections that have been open for a specific length of time?alsoIs there any way of auto-clearing alarms?John
Hello -I was wondering if it's possible to view this information via the CM or CLI on a connection basis and overall? The WAAS does both byte-level and object cache storing, correct? Thanks,John
Hi , We have configured the probe as below in ACE .probe http XXXXXXXX1interval 4passdetect interval 10passdetect count 4request method get url /sinji_mgmt.htmlexpect regex "online"Here though the server retuning some deferent value than “ online...
Hi,does anybody know where to find the complete list of WCCP pre-defined service numbers in use today and their meaning (i.e. WCCP 0 --> Web Cache, WCCP 70 --> HTTPS Cache, and so on)? I have only a partial list.Thanks in advanceRegardsStefano
Hi all,Please, currently I'm working on a small scale Cisco WAAS deployment. I want to know if it's possible to use the entry level Cisco WAVE-294-K9 as Central Manager.Also about licensing, does this appliance model come with the enterprise level li...
Hi,I have this particular setup with the WAE connected to the standby router(not inline) and the traffic comes in from the active router.The active and standby router are interconnected and using iBGP.Will the WAE actually sync with the active router...
I would like to know in the simplest terms how to use the source ip of the request to direct traffic to 2 different server farms.One ip address source range to one server farm and all other ip address sources to another server farm.
Hi Alli need your help to understand something about Cisco CSS load balancer, here is the situation,we have a cisco CSS which load balance the traffic between 3 apache servers,the issue is that the clients are using NAT feature, which means that they...
Hi Team,We have a ACE mounted on a 6500 switch. All our SAP servers are connected to this.Now i want to manage this swich using gui/asdm/cna. please find the attched details.Please support.Regards,Satya.M
Hi guys, Two questions about Microsoft Outlook Encryption and WAAS01) If I'm using Micrsoft Outlook with Encryption, only the TFO is used or I can say that TFO/LZ/DRE are used and only MAPI Accelerator is not used02) Is there any way, using only C...
Hi All, I have ACE appliance 4710, configured as load balancer for Microsoft Exchnage 2010 Servers. Customer has implemented BlackBerry Enterprise server and facing issues related to disconnection.BlackBerry guys provided me the documents whic...
When is this going to be available? I came across it in an article which referenced available in v4.4. I'm running 4.4.1 and I don't see anywhere in the release notes about it. Perhaps it meant v4.5? http://www.networkcomputing.com/wan-optimization-a...
Guys,Is there a way that I can configure authentication using ACS 5.0 to access a certain server farm group only for a specific user?Sent from Cisco Technical Support iPad App
