Following is what has been configured so far:probe http url.test.com:1111 port 1111 interval 34 faildetect 17 passdetect interval 60 expect status 200 200 header Host header-value "ssl" open 1serverfarm host url.test.com:443 description url.t...
Hi,I've to do url redirection from port 80 to port 443. I've following configured:rserver redirect url.test.com-rd webhost-redirection https://url.test.com/ inserviceserverfarm redirect url.test.com:80 description url.test.com - port 80 redirect *...
Hello,About the WAAS express solutionI want to know if it's normal that the WAAS express routers do not appear on the WAAS CM.Also, do the WAAS express solution support Get VPN : that is can I activate both features on the same interfaces of a router...
Hi All I am having a strange issue with a context on an ACE module, there are 2 Secure Web servers (HTTPS) which have data uploaded to them, this is working fine until the data exceeds around 4Gig in size for a single file, smaller files are uploaded...
We are using OVH configure help guide, http://help.ovh.ie/VrackLoadBalancingACESimpleWe have following setup:vlan 1515 is where the load balancer is, and the vlan 2911 is where all the servers are. There is a 199.239.227.0/24 public IP assgin to the ...
I will be deploying the ACE with two virtual contexts in routed mode. Each context will have its own separate server VLAN, but I am wondering if I can share the Client side VLAN between contexts? Is this possible, or does each context need it's ow...
On an WAN router where WCCP redirection, ip inspection, routing, QoS, IPSec, and NAT are configured, what's the order of router operation on the LAN and WAN side? I have seen a flow chart a couple of years back. So I'm hoping to see an updated one.Th...
Hello,I seem to be having a lot of trouble with a very simple implementation. I have 2 routers and a data centre WAE via WCCP. These devices are on the same L2/L3 segment (x.x.x.0/24). The WAN interfaces on the routers are in different networks. The ...
Hi,I have ANM 4.3 installed and running (demo licese expired, but we are getting a new license).It worked without problems. I could log, create new users, monitoring, deploy....I need to install a softwar that needs a MySQL database.Is it possible to...
Hi everyone,I have a problem configuring URL redirect on ACE 30 (Version A4(1.0)).When a user enters IP address or a name of a service (http://aa.bb.cc or https://aa.bb.cc), the ACE module should redirect him to the page https://aa.bb.cc/logonpage. ...
Can you give me a command or procedure to copy files from a server on a directly connected network to a WAE running 4.2.1?Possibly would there be any way to copy all files from two directories of a Hard Drive connected to the USB port of a WAE? Might...
Hi all, I have a scenario.On our website, there is an option to pay mobile,electrycity etc bill from payment gateway (third party). when user click on that link, my servers(behind CSS) should go to paymrent gateway using their SSL cert (paymen...
What is this ??ACE# dir disk0: 2846 Jun 14 2010 15:40:33 NORDICID_PROBEACE# sh script code NORDICID_PROBEError: Called API is invalid or non-existantHardware is ACE-4710-K9 and software A3(2.7)The probe itself is functioning ok according to show pr...
HiI've configured my ACE to loadbalance all hits on a 2 servers farm. It's working, fine.Now I want to loadbalance hits with a specific url on another farm, and it's not working (hits with the specific url are not logged in the new policy)Here is wha...
