Application Networking

Hi all,do you have any information about the CPU load on the ISR G2 routers, when the wccp is configured on these platforms? I have to decide between the inline mode and WCCP mode, but I don't know how much the wccp influents the router's performance...

When adding SNAT config under SVI for ACE, does the interface need to be shutdown and then un-shut to ensure proper NAT functionality. interface vlan 9999 shutdown  nat-pool 1 10.117.218.230 10.117.218.230 netmask 255.255.255.255 pat no shutdownI am ...

Hi all,  I am currently having difficulty getting the correct login role when using RADIUS against Microsoft NPS. When I authenticate I am always assigned the network-monitor role. Here are the settings I am currently using for both ACE and NPS. Can ...

Hi,How do we find actual Client Source IP address in One armed mode ACE for NON-HTTP application like LDAP,FTP and etc....

Hi,I have a question about the config of the ACe probe.I have the following probe defined :probe http P_HTTP_TEST interval 5 passdetect interval 2 passdetect count 2 request method get url /test expect status 200 200 expect regex trululuI would like ...

'certificate _ waas-self_.p12 is expired, it is configured as machine cert in global settings' : the above alarm was display on the CM. how can we solve this alarm issue ?

Hi All,Can someone help to understand the difference between ACE module and ACE appliance, as i am observing ACE module is providing more throughput when compared the ACE appliance, Is the only advantage we getting with contexts ....thanks inadvance,...

We are using a sticky serverfarm with 2 real servers, one server was down for maintenance for an extended period of time. When it came inservice again it was not getting any connections. is it because all the connections had stuck to the other server...

How can I monitor CSS 11501 CPU, Memmory, Sessions and all possible usefull things?Is there a Cisco Tool for this?Regards,

Hi Expert,My ACE module rebooted itself and after the reboot it lost all the config and it has been booted with factory default setting.Software  system:    Version A2(3.3) [build 3.0(0)A2(3.3)]  system image file: [LCP] disk0:c6ace-t1k9-mz.A2_3_3.bi...

Hi,I am trying to get a sample command output of "show chassis inventory" for:CSS 11501CSS 11503CSS 11506Can anyone help?Thanks in advance.Mike

Howdy!I have a question about if it posable to configure different VIPs and configuration parametrs(class-maps,policy-maps and other parameters)  for deferent server-farms under same Virtual Context?For example:I want to do Loadbalncing for some HTTP...