Application Networking

We have an ACE-20 module for the 6500.Our organization has an FTP Server Farm with a VIP setup on the ACE for Incoming Connectionswithin a DMZ in order to load balance across multiple FTP servers. This is working just fine.However, for Outgoing conne...

HiWe have an ACE 4710 Appliance with two user contexts. We are trying to get vservers statistics using SNMP, but the snmpwalk for the "slbVServerClassMap" is not showing us the complete list of class-map configured on the specific context. There is a...

Hi all,I've been searching to recovering this core dump, but im not sure if it will work, and dont know if i could reboot the appliance after copy the core dump file.Didnt found any related document too, so if any one could link me some about this, i...

Hi,I need one help..1. I have 2 different Application installed on same Server (Web Portal & SSO)2. Both these applications need to be load balanced.3. 2 VIP is available.Traffic Flow:Internet User--> Web Server--> SSO ServerHow ACE will do the load ...

Hi,May I know if there is any limit on the number of router interfaces for WCCP interception?For example, there is an end site with primary and backup MPLS circuit, together with 5 or 10 LAN interfaces (in VLANs):interface fa0/1 ip wccp 62 redirect i...

Please explain me about "virtualblade" feature. What are advantage the customer will get from this feature.What are all the application we can run on his "virtualblade" feature.

Hi,We are implemented Load Balancing of OCS 2007 Enterprise R2 and the clients are seeing slow and disconnection of services. The implementation is in Mode One-Arm and in the context there are also other services operating. Is there some good practic...

I have two 7341s (different sites) that fan out to a number of 502s (~100), and a few 612 &  674Each of the 7341s will periodically report the following in the syslog:java: %WAAS-CMS-4-723008: ce(DataFeedPoll): Exited badly `runExecCLI snmp trigger c...

Hi Zach,A question regards WAAS pre-positioning. Is there any way to determine what files (and directories from which these came) have been pushed by a pre-position policy ?? I have recently set up a couple of policies and although the system reports...

hi allI've two WAE in my core, 612 (10.99.100.95) and 674 (10.99.100.96)and 3750 stack is my core switchI configured wccp tcp-promiscuous router-list 1 l2-redirect l2-return mask-asign in both WAEand wccp load balance is work finebut in my environmen...

Ive done this a few times so im not sure what I am missing.When I hit my vip nothing happens. not even counters go up-i attempt to telnet to the vip on port 443..and nothing. SSL will be installed latertraffice will come in on 443..than go to port 80...

I need to migrate services from our CSM's to new F5's. I've setup a test and placed the F5's on the same switch as the CSM sharing the same Real Server network and Virtual Server network. I've setup a VIP on the F5 that works fine on port 80, but for...

I've got the WAAS setup and i'm see ok acceleration between sites but I have a complete failure of remote desktop.  I've had to place a deny statement in my access list on the remote sites router for port 3389 to exclude traffic from the WAAS to even...