HiWe have WAAS deployed at our client place with around 28 branchesJust curious to know how the Graphs calculated or co-related within the system.Currently as per our observation one of the branch WAE graph shows 16G traffic for last one hour, howeve...
hi everyone,i'm wondering if it's possible to query the amount of TCP connections via snmp, that are handled by a wae.it's an important characteristic value to check if optimization is working properly.looked over the several MIB documented in the la...
Has anyone deployed WAAS using multicast for the WCCP registration? We're using the multicast address of 239.0.0.1 ip pim dense-mode and multicast routing being enabled. Does anyone know if you can use ip pim sparse-dense-mode instead of ip pim dens...
Here is a scenario I'm running into and want to know if this is expected:WAE1 is rebooted and all of the hash buck is assigned to WAE2 to optimize all the traffic.WAE1 comes back online but receives a different hash buck assignment 128-255 instead of...
Hi,I have an ACE fronting a two Apache webserver serverfarm and performing SSL termination for the website served by the serverfarm. The entire website needs to be secure, i.e. every page needs to be https as opposed to just sub-sections or specific ...
Hi All,My securitypeople want me to drop connections if a http header , like PISA_ID is coming from a client. I don´t need to look into the header, just drop connection if the header is there. Any suggestion to solve this will be welcome. I am runnin...
Hi All,I have configured my 4710 to load balance 3 servers for the following URL:http://10.1.1.24:21080/cms/ui/pub:LoginFor whatever reason this doesn't work.access-list ACL_permit_all line 1 extended permit ip any anyaccess-list capture line 8 exten...
hellohow to get URL www.xyz.com to be accessed by allandwww.xyz.com/abc allowed only to a certain subnet - say 10.1.100.0/24mind you 10.1.100.0 should also access www.xyz.comwe have many exisitng URLs allowed to everybodye.g www.xyz.com/pwcbelow is s...
We have a CSS laadbalancer connecting to a couple of ldap servers. The ldap look up takes longer than usual and there is pooling set up on the ldapserver. The issue is the css does not send a FIN ad as a result the session stays open on the ldap but ...
Hello,I'm trying to replace the SSL Cisco certificate displayed when users access the 4700 Device manager Web config.The 'policy-map type management' mode doesn't allow any type of SSL commands. Can someone provide a sample config on how to do this?A...
HiI have few WAE 512 installed in my network. Every use 4.1.5b software. I have problem with one. I have upgraded it from CD and after that I see below alarms:Directy after WAE restart appear:Major: DRE (DRE+LZ) initialization failed: <>after about 1...
If I create a custom admin role, even though role shows a rule permitting changeto, I can't actually use changeto context command. Only works with default roles. Is this as expected behaviour for custom roles. even if same custom role is creaetd in e...
