Application Networking

Hi All,We have a setup to which we are going to implement WAAS. Datacenter having One Central Manager(512) + WAE (512) and Branch location having WAE (512).Both the Core WAE and Branch WAE are registered to CM and shows online. But Branch WAE is flap...

Hi all,I have a CNR with this logs:Server name/dhcp/1: 0 Unable to find necessary Client information in Inform packet from MAC address: '1,6,00:00:00:00:00:00'. Packet dropped!what does it mean and what solution for search the cause?Thanks

Hi All,We have the following inquiry, a loadbalancer is load sharing the traffic between 3 active nodes mr01, mr02, mr03. The 4th node will be active as well but we don't want to send traffic to it unless one of the 3 first is down. is it feasible an...

I'm deploying an HA ASA primary / standby with 1 GSS and ACE in primary and standby at DC 1 and the same at DC 2. Before I get to deep into the technology here is a basic layout of the networkTwo Layer 2 switches with servers dual homed between each ...

HiI found a good documnet on the Cisco site regarding the design of ACE. It descibed the differnences in routing and bridging and what is best practice.I cannot find this again, all i can find is configuration guides. I have checked all the usual pla...

L2TPV3 tunnels passing through ACE does not work. Traffic is passing in one direction but not in other direction, however L2TP tunnel is up and showing packet in but not out. L2TP tunnel configuration is as under:pseudowire-class ether-pw encapsulati...

Hi,I have two ACE modules in a HA pair and one of them has stopped responding to SNMP queries for all contexts. The other one is ok. Code is A2.1.4.Does anyone know how to restart snmp, ie process wise or removing config and re-apply.ThanksGary

I have a 2 context scenario. In the first one the ACE loadbalances client requests (any ip any protocol) to the internal firewalls and in the second one the ACE routes the traffic to the external firewalls to reach the servers in a distant network. I...

Hello : Can anyone tell me whether A2(1.4) code supports SSL termination ? My customer has 3.0(0)A1(6.3) and they want to gofo A2(1.4 ) .RegardsArjuj

I am kind of confused whats the difference between advance-balance arrowpoint-cookie and advance-balance cookies because when I do show rule XXXX I see Advanced Balance: ArrowPoint Cookieif i configure the content rule with advance-balance arrowpoint...

I have a need to modify the Source-IP in the HTTP header to report the client and not the loadbalancer IP. I've attempted to use the method listed in the documentation, however the client IP is not being logged:module ContentSwitchingModule 5 vlan 12...

I have a CSS 11503 running ver 7.50.1.03 and I have an issue with load balancing. The connections seem to be hitting more to one server than the other. I have listed today's stats. Yesterday they were reversed where ps90prod4 was hit more. From the "...