Hello,i want to change a probe for an active serverfarm. But after deleting the old probe and inserting the new one, all probe entries are cleared. What is the right handling to change a probe for an active serverfarm?Tia,Stephan
Hi everyone,I will deploy a building block to ace but I recieve:"Failed to deploy config to device: Infringing CLI command: null with reason: reached max checkpoint limit 10."What is the problem ?????Thank's Rene
Hi,A bit a newbie question. I'm running a few 11501's and 11503's, they're all running the following code:CSS11503# sh verVersion: sg0810106 (08.10.1.06)Flash (Locked): 08.10.1.06Flash (Operational): 08.10.1.06Type: ...
I have a serverfarm with four rservers defined with port 80,8080,8009. Each rserver is defined with a probe for each individual probes like TCP_80, TCP_8080 and TCP_8009Out of these three ports only port 80 is listening. Other ports are downWhen I do...
Hi,I have 2 css box configured for redundancy using VIP.When i issue the command sh summary on the box that hold the contents that are in a backup state i'm seeing hits on the services. I don't understand how the services are being hit by clients thr...
can anybody give me some material regarding DC 3.0...is there any design guide for DC3.0 provided by cisco?.....I have the DC design guide 2.5 which doesent discusses nexus...
please look at the diagram attached, CSS 11503 has one connection to switch and has the same VLAN as router IP, 3 servers' default gateway is 10.1.1.1, on the CSS, the default gateway also point to 10.1.1.1.3 services are added into CSS to be balance...
Hi,i was seeking the switch to capture full size packets on the ACE Mdule with the the capture command.The Docs say only that the capture must be configured to jumbo-frames but i have not found how to do this.Sven
Hi Gurus,I need to configure ACE in one-arm model and in routed mode. Does any Guru can post a sample configuration of ACE (one-arm) and Catalyst.Thanks & Regrds,Shahzad.
I am starting to learn more about the ACE platform and am wondering the main difference between the ACE and CSS switch. From what I can see, it seems the ACE does the same thing as the CSS and a little more. Am I completely wrong?
WAAS Mobile server is installed on a Windows Server 2003 R2, which is a member of Domain. The problem we have is that Mobile Client fails UDP test on startup. This failure occurs both with the client connected across a VPN as well as on the same segm...
I would like to be able to test the difference for when WAAS is Optimizing and when it is not. I have 2 inline WAE's. I am specifically interested in measuring the impact of WAAS on RDP between the 2 sites with the WAE's. So, the first thing I did wa...
Hi,i'm a newbie to GSS and was asked the following question by a customer: can you have a primary (hidden) authoritative DNS server per cisco's DNS architecture recommendations and have the GSS act as the primary DNS server for the rest of the world,...
