Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear All,I have to deploy WAAS for one of my client and wanted to know the effect of DMVPN in this scenario.We have a star topology and we have EIGRP, OSPF and DMVPN implemented. All I wanted to know is that where should the wccp redirection be used....
HiI've had the following config tested :===rserver redirect sorry-serverwebhost-redirection http://sorry.test.com/inservice serverfarm redirect sorry-farmrserver sorry-serverinservicepolicy-map type loadbalance first-match test-policy class class-def...
I am bringing up a new facility in India and looking to deploy Cisco WAAS between this facility and the Corp Data Center in California. I have not work with Cisco WAAS before and not sure how to go about designing a solution for this type of scenario...
The following operations appear to be optimized by WAAS while on servers behind the datacenter core WAE:1. Navigating through directories2. Opening files3. FTP4. HTTP5. Copying files from the server to the workstation and vice versa.However, when sav...
Attached is a visio of main DC WAN edge. Right now our WAE (7341) is placed directly off of ncmc-dc-rt01. Now we need to start to optimize traffice comming from all three top routers (ncmc-dc-rt01, ncmc-dc-rt05, and ncmc-dc-rt04). Were would be the b...
Has anyone had any experience or good results with optimizing NetBackup traffic with WAAS? The NetBackup traffic is getting classified by the WAE's in my environment, but I am seeing little if any optimization for this type of application traffic.
Hello,On our 6509-E+switchblades with sup720/pfc3 and CSM module we noticed a considerable cpu load like:#show processes cpu sortedCPU utilization for five seconds: 85%/81%; one minute: 82%; five minutes: 41%after some research i'm able to reproduce ...
Dear Pros,I configured css 11506 for one of our customer.We are using 2 servers to load balance the load.But so far only one server getting most of the hits, i mean more than 80% hits.Please give the more suitable load balancing method to configure t...
I tested the default ap-kal-ldap script with success towards our LDAP 3 servers on port 389. But I need another script for port 636 secure LDAP. Just changing the script to use port 636 doesn't seem to be the trick... I suppose the hex data needs to ...
Hi,I have a strange behaviour on new ace module :I have a Dmz in bridge mode, I have installed a server on it with a simple web server, I first try to simple connect to this web server just being bridge between client and server.Sometimes it works ju...
Has anyone deployed Microsoft OCS using the ACE as a load balancer? Are there any sample configs out there for doing this? It looks like Microsoft prefers using source nat. Are there any gotcha out there I need to watch for?Thanks,Jeff H.
Hi,What are advantages/disadvantages of using bridge or routed mode for ACE? Are there any limitations regarding features when selecting one mode?Regards,Branko
hello peoplewas going thru the data center design guide using fwsm/ace..using above the below is what i need to get working1) user farm accessing server farm, they must be loadbalance2)thre are mutilple application servers , each server farm must hav...
