Application Networking

Is there a command which compares the configuration on the primary and secondary members of a CSS pair configured for ASR?In production I want to be certain that the two members of the redundant pair have complimentary configurations that will work i...

Hi - I'm designing the network topology for a multi tiered application using a 6509 with ACE and FWSM. Each tier will be in it's own VLAN and IP subnet and communications between tiers needs to be firewalled and in some cases loadbalanced. I propose ...

Hi,I would soon be carrying out my first WAAS POC on customer site.Would like to share in any experiences while doing the POC.Would like to share in any ideas as to know how to go about the POC and any pitfalls to watch out for.Thanks

Could I have a pointer to a typical network diagram to indicate the following Requirements.VLANs - all necessary VLANsSubnetsActive/Standby RedundancyServer load balancing without SSLServer load balancing with SSLSSL TerminationSSL InitiationFWSM VLA...

HelloIn my network we have a redundant pair of 6500 with CSM modules. After we changed a configuration on the active CSM and tried to synchronize the config with the standby module with the command hw-module csm slot standby config-sync, the standby ...

I noticed that under downloads on CCO, the top of the list is 8.10, further down is 8.20. Should I use WebNS 8.10? 8.10 and 8.20 have the same release dates. Any gotchas out there?

Hi All, How to shutdown Content Switching Module in Cat 6500 switches ? I want to shutdown only CSM-Module without disturbing Chassis.Can anyone please send me the command on that ?Highly appreciate your valuable reply.Thanks,

hello,can anybody tell me, what those it mean?:MAR 31 11:11:04 1/1 60 FLOWAGENT-3: Flow-Agent FCB event-queue bad point 1MAR 31 11:11:04 1/1 61 FLOWAGENT-3: Flow-agent detected error with fast-path FCB event-queueMAR 31 11:11:04 1/1 62 FLOWAGENT-3: F...

I have deployed a couple of WAAS units across a link and have issues.If I set everything to pass-thru, everything works OK (as no traffic is hitting any classifiers). The top line of my policy is basically a match-all pass-thru (just for testing).All...

We would like to use our CSS to do redirects for us. We have say 10 domains pointing to a single VIP, and we want to create a L5 content rule to match all 10 DNS names. The CSS seems to want to match ALL the "host contain" rules under the header fiel...

Hi,I'm implementing a transparent proxy using bluecoat. It uses WCCP between bluecoat and 3560.Now it's working (the HTTP packet is redirected to the bluecoat), but when i do "debug ip wccp event", it shows these messages :May 7 08:27:46.105 SGT: WCC...

I installed SSL Certificate and i configured SSL Termination Know SSL ( yellow lock in IE) coming only in the first page , after puting user name and password it disappear but still in the url HTTPS is that normal , is the connection secure between t...

Hi,I have CNR running within 4492r GSS v2.0. How can the CNR databases be restored from a backup?The mcdshadow utility is creating snapshots of the database, but to restore these snapshots you need the "copy" command, which isn't available in the "cn...

Hi,I have a problem regarding to the CSS configuration.In details, I have to configure the following flow on CSS:server request --> CSS VIP:port1 --> CSS VIP: port1 --> Client:port 2.Does anyone know how I can configure it?Thank you.Best regards.Gius...