i have two ACE Module in different chaissesi want to make Data-Center1 primary for all contexts and Data-Center2 standby for all contexts there is no commands Primary unit and standby unit like FWSMhow to acheive that?
Hi,I have to configure two CSS11503 to forward the connection request from two servers to CPEs. The problem is that the CPEs are in various subnets.Now, I think that I can't use the service and the group command but the nql command.Could anyone tell...
The "Appliication Mix" graph on the opening page of the management console shows a lot of "Other Traffic". Is there anyway to get a breakdown of what "Other Traffic" is?
My customer is asking me what is the way to go from Transport license to Enterprise license assuming all your hardware is ok to support the Enterprise. So the question is: Do you need to do some kind of IOS update in case of NME-WAEs? or reinstall al...
We have configured two CSS in vip redundant mode.If one CSS rebooted which is active and having high priority traffic is flowing from CSS having low priority.Once high priority CSS again comes online will it take active mode back? Secondly If now we ...
I have One-arm configuration.I can see bi-directional flows on CSS but client PC not receive anything, as I verified capturing packets.When client PC request directly from the servers it receive content.Also client PC receives ping reply from CSS and...
Hi all,We have a setup as follows:-MSFC-->FWSM--->ACE--->2 Server Vlans.The gateways for all the servers are the respective alias IP addresses. the clients can initiate inbound sessions to all servers and the servers can initiate outbound sessions t...
I am trying to configure an Edge Device to do App Acceleration and File Services. However when I do a "sh cifs auto-discovery last" I get a message "not connected to cluster". Any help would be appreciated.
Has anyone managed to get SoftGrid servers to work behind a 11500? If so, how? According to Microsoft, the setup requires something called "Direct Server return", can I do that on a CSS?
HiI deployed WAAS into our network with WAFS. Everything sims to work OK but on INFO level I have notification:INFO Host 1.1.1.1:139 was not discovered, bypass period: 60 sec, number of events: 1, reason: digital signatures are required by serve...
Hi, we have suddenly started to get the following message from our CSS? Does it mean what it states by the fact we are running on low memory? can anyone shed some light on this for us please?ALERT ID = 0000AK5TIME = Thu 13-Mar-2008 15:34:49 G...
Hi.Thank for this forum always.In transparent cache load balancing,the vip is configured like below,class-map match-all VIP-TCP80 2 match virtual-address 0.0.0.0 0.0.0.0 tcp eq www when user want to use a internet, when the traffic reaches msfc, and...
I would like to load balancing a web cache server.whenever a client connect to http, the traffic reached a MSFC,the MSFC check dst:0.0.0.0:80, and then forwarding to ACE?the flow right? It just check only a http to redirect cache!So I made a configur...
Hi,This is regarding a little bit of maintenance. What happens if after prepositioning the content the content is modified and let's say half of it is actually deleted from the origin server? Is the content automatically deleted from the remote CE? I...
