Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I inherited some 11150's running version 5 code. I'm trying to backup the running-config and whether I tftp or use FTP my command is accepted with no errors shown but nothing gets copied. Anyone have any ideas?Thank you,
Hi, this is the reverse from what is usually done. The user enters a URL starting with 'https'. This comes into the CSM-S, and I do not want it to hit the SSL daughter card at all. I want to redirect to 'http' then send to real servers, bypassing the...
Hi,In the situation where you have two locations connected by a leased line, one site is the DC and one the remote site. Both sites use WCCP redirection to the WAE which is directly off the WAN router. If the remote site WAE fails what is a) the cons...
Hi guys,I my company we use Tibco RV to integrate some productive applications, we use multicast with a internal address scope 239.x.x.x in a many to many relationship to exchange this traffic. That means every host have one or more applications that...
I am looking for the correct placement of WAE 512 appliances. I have a data center where WAAS Central Manager and WAE 512 Core appliances will be installed. The Data center will be set up as follows:1841 rtr xover to PIX515e xover to WAAS Core strait...
The problem is that CSS is overloading one service/server. 90% of all active client connetions are sent to one single back-end service/server instead of being equally distributed to all three servers.This is a new CSS11503 (installed 2 months ago).Ou...
Hi,I have an issue with a pair of resilient CSM's (WS-X6066-SLB-APC) that have been running on a Live Production System for over two years without a problem. We have a resilient pair of 6509's with a CSM and a SSL module in each.About a week ago, the...
When I follow directions to configure FT on my ACEs at:http://cisco.com/en/US/products/hw/modules/ps2706/products_configuration_guide_chapter09186a0080683a15.html#wp999520If you go to Table 7-1 on step 4. I cannot configure the vlan interface. When I...
Greeting,An application using tombat, port 8080. (http://myserver:8080/myapp/shared/login.jsp)Now, I need to redirect port 8080 to port 80, and I did: content test vip address 10.2.1.123 balance leastconn url "/*" add service test-peppard-8080 protoc...
Hi..I'm looking for a way to load balance a PXE server. Is this possible in a standard software - or do I need the extended software ?Anyone got a config example ?Best regardsTue N
I'm have difficulty understanding how to put my ACE blade in service. I have 1 vlan with external ips on my 6500 msfc. All the internal internal vlans default gateways on on my msfc as well (e.g. vlan 10 is 192.168.10.1). My plan is to create a new i...
Hi sirs,I need to know if someone can help me with the meaning of the options of the flow options command under the llama (debug) mode. On the CCO I found only the 0x103, are there other options? What's their meaning?Thxdavide
Hi, can you explain why the ACE module is changing the source port number for incomming connections? We have vip with cookie stickiness and 4x rservers. I have taken trace and also from show conns can see that vip/port is translated to real/port as e...
I have set up a real basic configuration with a verver on port 80 pointing to a serverfarm with two servers. I have no sticky enabled and no persistent rebalance on the vserver. If I go to the URL that points to the VIP the connection is made with th...
Is there anyway to use the ACE to hash urls? It doesn't seem to be possible, but I was thinking maybe there was some kind of workaround. Many CDNs offer the service of hashing an URL and changing it at a fixed interval to offer a little extra protect...
