Application Networking

We are planning to upgrade our CSM from 4.1.6 to 4.2.6 and wanted to be able to utilize the config-sync capabilites in the new code. First, is config-sync supported in bridge mode and has anyone had much success or problems? We weren't able to find d...

Hi,We have a CSS 11503. If we had a SSL module, will we be able to do the following;- configure multiple SSL certificate on one VIP?EX: - https://www.mysite.com (VIP 70.X.X.1)- https://theothersite.com (VIP 70.X.X.1)Thanks,Wig

I have been throw into the position of making a solution work that I had no part in ordering the hardware for. I have 2 6509s with an ACE module with the 16GBps license and an FWSM in each. From reading the datasheets for the ACE and FWSM, I find the...

Recieved RMA for a 612 with 2x300 GB drives to work as RAID-1. The drives arrived in a separate box and I tried to run the rescue CD right away after installing the drives. That didn't work and I discovered that RAID wasn't enabled yet in the drive c...

Hello Guys,I am trying to set up a config in a one armed design with client connecting via https that should be redirected to differents http servers (some are port 80 others 8080 and 9000) and depending on the end of the HTTPS url I have to rewrite ...

Hello guys,customer's CSM randomly reset TCP connections without any log message, or reload csm module.reason of the reload is: Oct 5 09:16:08: %CSM_SLB-3-UNEXPECTED: Module 7 unexpected error: FPGA4 exception encountered. sh mod csm tech-support uti...

We have installed a NME-WAE-502 card in a remote Cisco 2811 router. The router is configured with a VPN-tunnel to the main site where the central inline wae resides.From the remote site you can ping the central wae and vice versa. We can telnet back ...

Hi ,I hope someone can help me out with this issue I am having with a CSS 11503. We are in the process of setting up an SAP portal with an Oracle backend. This portal consists of two front end Web proxy servers in the DMZ and a couple of Oracle/SAP a...

I have a mgt VLAN going between the Sup in 6500 and the ACE. ON 6500:vlan 16,500svclc module 1 vlan-group 500svclc vlan-group 500 500-550interface Vlan500 description Mgt VLAN ip address 1.1.1.3 255.255.255.240ON ACEclass-map type management match-an...

Anyone familiar with this error:Device discovery failed: For input string:"1/0"I am receiving it when attempting to import a new chassis into ANM. All of the credentials are correct.

We'd like to implement two maps in one policy, one is a url map and the other is a header insertion map. What is the boolean relation of those two maps, AND or OR?Thx, Q.Xie

helo,is it possible to configure ACE module from cli or DO i still need the ANM VER 1.1 to make it work?thanks