Application Networking

Hi, Can anyone please point me an example to learn how can I use the SSL Services Module in standalone mode not using any PBR in MSFC. In the configuration guide the only example is using PBR, and I dont't want to use cause im my design the traffic b...

I have the following question, the port number in a content rule is this the port to witch the content switch forwards or to witch he listens on.Suppose i have an url www.myname.orgwhen i receive this on the content switch i want to redirect it to th...

I am having a problem with a CSS 11506 internittently locking up when I try to access it via telnet or console. I have a second CSS in a different location that does not have this problem. The active software version on both CSSs is SG0750103. I have...

The public interface of my content switch is mapped to a vlan with public addresses. My servers are on a diffent VLAN --> private address schema. On the VLAN where i define my VIP addresses i also have an intrusion detection system installed. We ofte...

HiIs it possible to do GSLB with SSL termination on the same CSS?ThanksD

Hi,How the GSS gets the load and availability statistics from the CSS.What does the keepalive KAL-AP do for finding the least loaded site.Is it based on the no.of connections,Hit counts ,server load ?????Thanks in advance..Rajesh

Hi everybody,I am working in a migration project from CSS to CSM-S. The problem is that when the user type https:\v3xxx.xxx.xxx\v3 it redirects to http which the customer doesn't want. The customer wants that it will be https traffic.But if we try wi...

Hi, I am not sure what I am seeing on the CSS is correct. I have removed version 8.10 from the CSS and changed the primary boot file. Rebooted but still see the following output ?NLAMSDC2CS010# show version Version: sg0750103 (07.50.1.03)Flash (Locke...

Need to understand who the traffic flow/session goes thru the CSM module. My my concern is to undestand who a catch-all vserver works, Is the CSM making a entry to forward back the traffic to the origin host?Thanks,Gustavo

Hi.Need your help. My customer wants to implement his CE 565 just like a proxy. He will have a private ip on one interface and a public ip on the other interface. Is it possible to have the clients specifying the ip of the CE in their browsers proxy ...

Hi Forum -Using CSM modules running 3.1.4 in a GSLB setup with ressources in two data centers - east/west - I would like to achieve load balancing between the two data centers (3 servers per location running same application) based on the source IP o...

Gilles,Could you please advice the CSS content configured with stickiness SSL ID and balance method round robin is recommended configuration or not.Are there are any issues with SSL stickiness with the browsers i.e IE .Note:- I am not using SSL Modul...