Application Networking

Hi,I am having issue with SSL termination config on the Cisco CSS11501.With my config below, when I hit the Virtual IP of the CSS, httpS://10.211.242.164/,I get a prompt for a SSL Certificate warning but since I know its afake SSL, I say OK (I use IE...

                   How do I allow PCoIP over WAAS in VmWare environment?

Hello, We are having the following resource configuration on our cisco ACE 4710 appliance with a default license of 1Gbps bandwidth. lb1/Admin# sh run resource-classGenerating configuration....resource-class Admin-RC  limit-resource all minimum 15.00...

I am looking to accelerate compressed and encrypted ICA traffic.  Can WAAS handle this?If WAAS turns off compression and handles it itself, will that mean LAN traffic will be uncompressed on the server end and client end? thanks,gb

LLog Buffer (4096 bytes):valid source MAC address (00:00:00:00:00:00) on port Gi2/1 in vlan 14d15h: %C4K_L2MAN-6-INVALIDSOURCEADDRESSPACKET: (Suppressed 2 times)Packet recei                                                                             ...

Nice day. I will be happy if anybody could assist me with following questions.We are planning to introduce WAAS system.We have the channel between Branch office and Data Center 300mbps.Which WAAS technology better to use?We  examine this model WAVE-7...

WAE-674 running 5.1.1.d code. The WAE-674 stops working until a reboot or move to another switch port.  Are there any known connectivity issues?

Hi guys. I want to obtain the ACE command equivalent to CSM  variable TCP_WND_SIZE_OPTION command.Also, I wuold like to know any recommendations about TCP windows size and scale on the ACE. Thanks in advance!

Hello all,   My company is running WCCP on 6500 VS-S720-10G with IOS 122-33.SXH6 and two Virtual WSA.     We are encountering the following issues:  1.  WCCP is not running in hardware.  Based on the following documents WCCP should be run in hardware...

Hello, I am trying to resolve an issue involving load balancing of Oracle using Cisco ACE Loadbalancers.  It is not too complicated of a set up, at least I don't think.  There are two rservers in a server farm.  I have the server farm nested within a...

Hi It is possible to configure True IP client or something like that in an ACE module? Thanks for your help Regards