Application Networking

hiACE just went end of sale and Cisco recommends migration to Citrix Netscale 1000V.No product codes are provided to enable ordering of this product.. Please advise?Thanks.Sent from Cisco Technical Support iPad App

Hi Ya all! I have an ace that i am wondering can do the following?A user comes from the internett and types inn www.test1.com, the user is redirected to my ace, the ace is looking on what type of adress the user typed and then forwarding the traffic ...

                   Hi I have a ACE4710, I´m have a problem in a Serverfarm with two realservers.The Server Farm is in configration mode Active-Standby with a probe SIPserverfarm host testSBCprobe SIPSBCrserver RLS_SBCbackup-rserver SBC_ACMEinservicer...

Hi Team,Recently we have configured the WAE device in my network, now today one major alram is showing on device and internet is very slow access.(Cisco 7541)Unable acess to telnet or ssh , but i am able to ping and GUI access, but in central manager...

Dears ,I need to upgrade from A3(2.6 ) to A5.X but actualy I try this command ,Internet-ACE2/Admin# telnet softnpTrying 127.3.0.20...Connected to 127.3.0.20.Escape character is '^]'.Linux 2.6.10_mvl401-cn3840_evb_nic4-mips64_octeon_be-Cavium-Octeon (...

Hi,I have cisco wave 574 with raid configuration. now one of my HDD has problem. can I replace this HDD with generic HDD ?the original HDD is seagate 500G SATA-II, but I cannot get the same type. I get the HDD seagate 500G SATA-III.Can I use it to re...

I have a site that is behind an ACE.  I can see a HTTP_FRONT_END_HTTPS=On header variable coming thought which appears to indicate the connection to client is secure.  Can somebody tell me if this is added by the ACE be default or if it needs to be c...

Dear Expert,I was ask to disable the virtual blade features in our WAVE-694-K9 (running universal-k9 Software Release 4.4.5d). I try  issue the command           1. virtual-blade 1 stop  in exec mode ( I did for all 1-6)          2. no virtual-blade ...

I have an ACE that I'm trying to get configured.  I need a rserver to have the same ip address and a class map vip address.  ex below.rserver host RED   description REDS  ip address 172.95.94.250  inserviceserverfarm host REDS  transparent  rserver R...

Hi,We currently have a VIP that resides on an ACE30, listening on Port 443. Clients are connecting to the VIP through a https browser session, with the VIP simply forwarding the request on the rservers on the same port. From a stickiness perspective,...

Hi Experts! I am facing an issue while trying to capture a Span traffic on ACE  Tengig Interface .. Not sure what i am missing as  all the required configs seems to right... My ACE box is @ Slot 7 Router(config)#monitor session 1 source interface Ten...

One of the feature of our application is that our Application Server initiate text message to our devices sourcing from UDP 1120 and device need to see the message come from a specific pubic IP (2.2.2.2) with UDP port 1120 and reply back with the sam...

                   Hi All,I have two N7k and I want to configure two VDC each VDC has different VTP and enable OSPF between the two VDCs by using four links my questions are:

All,I am planning to upgrade ten WAE 512 units from 4.4.5 to 4.4.7 and would like guidance from the forum here on how best to accomplish this.  I understand that the Central Manager can be used to mass deploy the software and upgrade the appliances a...