Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear Team,we have Cucm running with 10.5.2.14901-1 version and 100+ Cisco 7965 IP Phone (SCCP45.9-4-2SR3-1S). We are facing one issue, Unable Register after reconnect Lan cable or restart the IP Phone which is working. we tried 4-5 IP Phone are not r...
Dear Team,
Problem: We have to observe won't associate WiFi connectivity few users//stop accepting client associations until the AP is rebooted
WLC: Cisco 5508//code: 8.2.151.0
Laptop details: Windows 10//Intel I5-4210U 64 bit// Dual Wireless AC 726...
Hi Team,
I was implemented CUC-to-CUCM with SIP trunk last two month back, its working voice messaging system. when i was dial to voice profile no its working its says play IVR message and ask PIN no. Now we are observe the one issue. when i have pre...
Hi Team,
I have configured OEAP 602i testing with the Corp SSID its working. I noticed that it is Corporate SSID not showing after long idle time at my home. once i have restart the device its working. Every day same issue.Kindly suggest any setting ...
Hi Team,
I have added card (HWIC-2FE ) not detecting on cisco 2811 router, now running IOS Image (c2800nm-advsecurityk9-mz.124-20.T1.bin) version. But as per Cisco documents version table supported IOS is 12.4(20)T.
as per the documents
http...
Dear Ahmed,I have configured different Vlan on switch port access and deleted CTL file under security setting on phone. It showing TFTP timeout on the phone.We tried another model (78XX)Phone connected same switch port its registered & working.,
Dear Nithin,As per my observation IP address released and able to ping from IP Phone. We tried another model (78XX)Phone connected same switch port its registered & working. But cisco 7965 Ip Phone only its showing Registering .... Regards,Johnson
Hi Aseem,
Thank you for Reply
I have CUCM cluster(Pub+Sub) and one Unity server 10.5.1.I have verified utils diagnstic test ,all services are passed except NTP Stratum above 5.
I was verified NTP server stratum is 6 now and there no core active file ...
