Application Networking

We have over 250 WAVE boxes that we have just upgraded to 5.3.3b6.All the WAVEs (274 and 474) are connected via their Gi 1/0 interface to the back of one of our routers. We do not use the inline, only the Gi 1/0 with WCCP GRE.The routers only have 10...

                   Hi All,  This product is new to need your help in configuring this. I am explaining the architecture below:-We have a requirement to use WAVE-594-K9 Software Release 5.3.1 and in our Manila location and it will not talk to Waas cen...

Hi All,Partner has a Wave-694-K9 with standard 16GB memory, but one 4GB RDIMM had been removed.They are looking at replacing the 4GB RDIMM and don't know where to buy it.They do not want to purchase the 24GB upgrade, but looking at replacing the misp...

Dear All,Can any one suggest me how to change Inline settings to WCCP via Central manager Version 5.3.3 of a WAE device which i in network. Please provide me any document link which ha all this stuff.Thank and Regards,Mohammad.

Hi,I have configured ldap on a different ports than the 389 and 636.  How do I configure this port to be allowed on the Cisco load balancer.  I'm a newbie to cisco load balancer.  Is there any specific configuration to be followed to set the customiz...

Hello-Does anyone know if it's possible to apply a wccp 62 redirect in on the outside interface to capture both sides of the conversation? We need this to be able to redirect the return traffic back to a WAN optimization appliance for cloud accelerat...

Hi - I need to rewrite a request and a response using the ACE-4710 appliance.  There are multiple ports within the server farm that will be used.The request will come in as http://erptest.abc.com and will need rewritten to http://erptest.abc.com/def/...

hiACE just went end of sale and Cisco recommends migration to Citrix Netscale 1000V.No product codes are provided to enable ordering of this product.. Please advise?Thanks.Sent from Cisco Technical Support iPad App

Hi Ya all! I have an ace that i am wondering can do the following?A user comes from the internett and types inn www.test1.com, the user is redirected to my ace, the ace is looking on what type of adress the user typed and then forwarding the traffic ...

                   Hi I have a ACE4710, I´m have a problem in a Serverfarm with two realservers.The Server Farm is in configration mode Active-Standby with a probe SIPserverfarm host testSBCprobe SIPSBCrserver RLS_SBCbackup-rserver SBC_ACMEinservicer...

Hi Team,Recently we have configured the WAE device in my network, now today one major alram is showing on device and internet is very slow access.(Cisco 7541)Unable acess to telnet or ssh , but i am able to ping and GUI access, but in central manager...

Dears ,I need to upgrade from A3(2.6 ) to A5.X but actualy I try this command ,Internet-ACE2/Admin# telnet softnpTrying 127.3.0.20...Connected to 127.3.0.20.Escape character is '^]'.Linux 2.6.10_mvl401-cn3840_evb_nic4-mips64_octeon_be-Cavium-Octeon (...

Hi,I have cisco wave 574 with raid configuration. now one of my HDD has problem. can I replace this HDD with generic HDD ?the original HDD is seagate 500G SATA-II, but I cannot get the same type. I get the HDD seagate 500G SATA-III.Can I use it to re...

I have a site that is behind an ACE.  I can see a HTTP_FRONT_END_HTTPS=On header variable coming thought which appears to indicate the connection to client is secure.  Can somebody tell me if this is added by the ACE be default or if it needs to be c...