Application Networking

Hi folks,someone could help us?We have a LB of appl did with .Net (dot net) port 5000 in 2 servers. We are seeing in each server a lot of connections at state ESTABLISHED(more than 500 connections) for that port.When we use sh flows, I only can see 2...

Hi,When defining a DNS rule using proximity, I can specify the "wait" parameter. What is the exact meaning of this parameter ? assume that I defined an equivalence window of 10%, does this mean that as soon 10% of the RTT values have been returned, t...

Dear All, I have got a situation...The situation isthat I have a pix515e, Content Engine andCisco 2620xm router...The 3 attachments contain each of the systems configuration..They are arranged in the following way..There is a 192.168.0.0 network ID r...

Hi, I'm migrating from a css11151 & sca11000 toa css11506 with an ssl module. Is there a docor can anyone recommend a way to export the certs & keys from the sca and import them on the css?I've tried cutting & pasting from the sca configs to key.der...

Hi, We have two sites (Corp-net and Customer-net) connected via WAN, currently if customer want to access www they connected to the proxy server on the is Corp-net. This is causing delays due to distance between the Customer and Corp-net. So what we ...

Hello.I have a CSS with one Content that balances traffic among two servers. All the connections come from just one client.When I put one service in SUSPEND state the connections are still balanced across the two servers. I think it's because the con...

I am trying to upgrade the CSS11501 image using the FTP command thru the management port.The laptop is able to ping the switch and the switch the laptop so comms is there. When I run the ftp-record command and then try to ftp the image, it is not co...

We managed to get the CSS units up and running and I am just using TCP as my application keepalive type. However, our servers that are behind the CSS boxes are getting this error message every few seconds. Anyone with any insight? Should I change teh...

We are planning to implement Windows Media Services 9 as broadcast server to stream live powerpoint presentations.We have a lot of CEs in our Intranet (for e-learning) and we would like to activate the WMT license to use these CEs as cache proxy for ...

Good day!There is schemeuplink uplink | |CSS1------CSS2 | | |--Server--| Server is directly connect by two interfaces to CSSes in hot reserv mode (active one interface only).CSSes is configured in active-standby mode.To each othe...

I would like to use the CSS to termninate SMTP TLS connections. In the cisco documentation in mentions that the CSS supports TLS version 1. However there is no documentation of configuration etc. Can anyone explain how this works on the CSS or if I w...

Is SLB supported in the IOS for the Cisco 2821? I cann't find it in the Feature Navigator:-( And which feature set I have to use? Thank you.

We have a CSS11506 with SSL module.We want to initiate a SSL session with a client certificate to a backend server running IIS 5.0 and doing certificate mapping.We see in the traces that the SSL handshaking is performed but for some reason the SSL mo...

I have my load balancing configured as follows:URLs/xxx/1 and /xxx/2 route to server1URLs/xxx/3 and /xxx/4 route to server2This is working fine when the client application opens and closes the tcp connection for each http packet. For performance rea...