Application Networking

Does a virtual address on a CSM normally respond to a ping?If this is not default behavior, how would you configure to respond?Thanks

Hi @ll,I am using a SLB module in our 6500. We have multiple VIP's and servers configured. So far, so good, quite easy.We check our real servers using a simple probe (http). I am reading a small HTML file on the server. I expect HTML code 200 and tha...

I have consistent problems with our 11150 switches, one will stop transmitting like it is the "backup" switch but it never transitions from being "master" so all traffic is stopped. It never shows a link failure or a state transition. There are no er...

I try to setup two web servers (10.1.1.10 and 10.1.1.11) using CSS11000 for load balancing. By using VIP address 10.1.1.30 with stricky content rule. However when the application server rely back the request the URL still contain the web server ip ad...

would like to create a content which is going to advance-balance on a cookie string and which is going, depending on the string, to either use service 1 or 2Both services are on the same machine the only difference is the port number.The problem is t...

Is there a way to prioritize HTTP traffic to certain sites? I would like traffic to www.whatever.com to be preferred over all other traffic.

Hello.I don't have a lot of experience with CSS, so, let me know, if my question is dumb. Is it possible to configure CSS to send packets back to clients throuh the same interface that client's request came from? I.e. If client establishes connection...

Presently we are reyling on our reverse proxies to direct traffic to our web pages (from the Load balancers), the problem is that the RP's are overloaded when dealing with the images, i would like to know how to bypass the RP when loading the images ...

HiPresently we are using port 80 for all of our web traffic. This is how the client would connect to our eportal, first they would enter the portal and hit the LB (load balancers) then would be redirected to the Contect acceleators, then back to the ...

Hello,I want to load-balance SQL servers (running microsoft SQL). All servers have its own database but the databases are the same on each server. The database will be used in read-only not in update mode.Does anyone have any experience in SQL load-b...

I ever tried to configure Box-to-Box redundancy CSS11506 and CS-100(Arrow point). It was successfully tested.It looks have no problem to make redundancy between CSS11500 series and CSS 11000 Series.By the way, when I have tested Redundancy Between CS...

Hi, Can a content Switch 1100 be configured to respond to proxy-arp?Thanks

i recently took over the administration of a sca11000. the problem is, the guy that used to manage it left the company and i am unable to connect to it remotely. i am trying to connect to it either by the WEBUI or telnet....doesn't matter to me. at t...

I have a customer who are using CSS as a firewall load balancer.by the way he have two firewall with fast-ethernet interfaces and two with Gigabit ethernet interfaces.Now the load is 1:1:1:1.Can I give a load to firewall path on CSS?Then, what comman...