Meet the Authors Event - Network Programmability with Joe Clarke
(Live event – Wednesday, May 21st, 2020 at 10:00 a.m. Pacific / 1:00 p.m. Eastern / 7:00 p.m. Paris)
This event had place on Thursday 21st, May 2020 at 10hrs PDT
In this session, Pearson co-author and Distinguished Engineer Joe Clarke talks about how Network Programmability models with YANG improves and achieves better network scalability, replicability, and reliability by leveraging automation.
Joe Clarke is a Cisco Customer Experience engineer; Joe has contributed to development and adoption of many of Cisco's network management and automation products and technologies. He helps to support, enhance, and promote the embedded automation and programmability features, such as the Embedded Event Manager, Tcl, Python, NETCONF/RESTCONF, and YANG. Joe evangelizes these programmability and automation skills in order to build the next generation of network engineer. Joe is a top-rated speaker at Cisco's annual user conference, CiscoLive!, as well as certified as a Cisco Certified Internetworking Expert, Certified Java Programmer, VMware Certified Professional, and certified Cisco network programmability engineer. Joe provides network consulting and design support for the CiscoLive! and the Internet Engineering Task Force (IETF) conference network infrastructure deployments. He is a co-author of Network Programmability with YANG: The Structure of Network Automation with YANG, NETCONF, RESTCONF, and gNMI as well as a chapter co-author in the Springer publication, Network-Embedded Management and Applications: Understanding Programmable Networking Infrastructure; and he served as one of the technical editors for the Cisco Press books, Tcl Scripting for Cisco IOS and Programming and Automating Cisco Networks: A guide to network programmability and automation in the data center, campus, and WAN. He is an alumnus of the University of Miami and holds a Bachelor of Science degree in computer science).
Outside of Cisco, Joe is a member of the FreeBSD project, and the co-chair of the Ops Area Working Group at the IETF. Joe is a certified commercial pilot for single-engine airplanes with an instrument rating.
This event provides an opportunity to interact with the author in real time and learn more about him, his story, the story behind his publications, and how he became a renowned expert.
Hello everyone I am fairly new to advanced networking concepts. I do some networking for my company but most of it is not setting up new devices or networks. Anyways, I was able to get my hands on a Cisco ISR 2921 and a Cisco 3560-x PoE L3 switch fro...
Hi guys, I have a Cisco switch configured with two vlans : VLAN 10 : VoiceVLAN 20 : DATA My switch ports are configured as shown below : interface GigabitEthernet1/0/Xswitchport mode accessswitchport access vlan 20switchport voic...
On ASA IPv4 "dual ISP" failover is well documented (ex: here and here) and works well. Is this a supported feature for IPv6?Also, are there any technical documents that describe best practices for configuring IPv6 with two ISPs on a Cisco ASA?Th...
I am trying to pull a report from Cisco Prime that shows the switch stack Chassis ID. I also found that the Chassis ID matches the interface labeled GigabitEthernet0/0 but I cannot find a report that show that either. Any help on getting this ...
Hello, We recently have had issues of where IP tracking was causing some Windows PCs and IOT devices to detect (falsely) that another device was using the same IP, and so in the case of Windows the user would see a duplicate IP message, and in the ca...