This issue I believe should be escalated and its severity raised.We've confirmed that the bulk API /dataservice/data/device/state/Interface?count=count does in fact NOT contain interfaces for cEdge devices. Existing client monitoring applications tha...
Hello, I have a SF350 switch with Fe ports and 4 Unifi Ap's connected through a POE Injector. The problem is that when i connect them all to FastEthernet ports when the clients upload the ports from the switch are flapping. (I reproduced the issue wh...
I am not seeing the webex plugin to schedule meeting in Outlook 16.32 for Mac after upgrading MAC OS to 10.15.5? Any solution? Webex productivity tool is also not starting up.
Webex meetings need to accommodate live music. This enhancement is a must as some of the Webex competitors (Zoom, Teams, etc) have this feature and lot of people leaving Webex and going to others especially Zoom.
HelloI have 5 CUCM Clusters running 12.0.1.24043-2When checking License Management => select "user" => "View Details" I received this pop up: "Usage Details for null" instead of the details of the reason of why this license was consumed. Is there a w...
The bug CSCvu35355 shows the status as fixed but there is no known fixed release. We have seen the issue even using VDB release 336. Has anyone faced this issue and fixed it without implementing the workaround?
Hi. We have a secure cluster with ATA 191 and CUCM 11.5 and we are unable to secure the ATA. The ATA had firmware 12.0.1 and we upgraded the firmware to 12.0.1 SR2 but we could not secure the ATAs no matter which firmware we used. When reading the lo...
Hi All, Wondered if anyone could advise?. I'm seeing quite a few cases of WLC 5508 with expired MIC's(10year), does the below bug address the fix on the WLC will it actually fix the certificate ignore error so that we don't need to disable NTP a...
I have about 6000 VPN users that are using AnyConnect v3.5 and when they use RDP to their workstations AnyConnect disconnects and then reconnects again. This may happen multiple times. Sometimes it will stabilize with the 2nd connection and in other ...
You need to go to MST configuration. The configuration guide say thay the maximum suported instances is 128 for rpvst and for mst is 65 instances but each instance don't has limit in vlans.
