Cisco Bug Discussions

Hi,   I'm receiving this warning, but on CLI with command clustercheck and clusterconfig->connstatus I haven't problem. what means? The Warning message is: Error connecting to cluster machine hostname (Serial #: xxxx ) at IP x.x.x.x - Connection fail...

I really wish Cisco would improve their versioning/alerting. This alert  came to me because I subscribe to ISE alerts for ISE 2.3.  Upon reading the bug alert is appears to not pertain to v 2.3, but rather to v2.2(0.470).  Of course, if you read more...

Have you tried these couple of things?    1) Update Chrome to version 66 (if haven't been automatically updated). I've been told by the WebRTC's PM that this version packages improvements in this regards.    2) We've noticed a significant video and p...

Hi could anyone suggest to fix bug "CSCvg88057 - Outbound Traffic is getting matched in Inbound ACL" on Nexus Model : N9K-C9372TX.   Thanks and Regards Baddinath

Cisco should listen to the customers and take care of such a problem.

I get this error and my outlook 2016 mail client cannot be integrated.  I applied the fix as listed in the reported solution, and that did not fix it.  The problem is unchanged.  This is not the first time I've experienced this problem.   I need a pe...

.

.

.

Could someone confirm is version 9.1(7-23) affected or not, please.

Could anyone suggest how to fix bug CSCvg96153 on nexus c9372TX   , sould i upgrade iOS .       

Hello,   our customer encountered this bug, I wonder if anyone have tested version 10.5.2-042 (as it is offered to update) and this bug was resolved? Otherwise, we have to rolback back to 10.5.1-296 (where we have encountered bug https://bst.cloudapp...

As a workaround you can reset the PSU via CLI, make sure you have power redundancy on the switch before doing this:   switch#power supply 1 slot B off then switch#power supply 1 slot B on

This bug affects Cisco ISE 2.3 with Avamar snapshots. Workaround was: Don't include in VM backups or Snapshots

ESXi host is showing a hardware voltage alarm. In the UCSManger , SEL log is filled with the following logs:   701 | 04/24/2018 01:28:59 | CIMC | Voltage P3V_BAT_SCALED #0x00 | Lower Non-critical - going low | Asserted | Reading 2.40 <= Threshold 2.4...