Cisco Bug Discussions

Hello We have the newest firmware sip78xx.11-5.-1.18 but this bug still seems to be happening? with corporate and personal

Hello Community,Can Cisco address the remark from janower4652 of Feb 2, 2015 concerning the fix to use a 6900 version for a 8831 phone issue?If the 6900 version will fix the 8831 phone issue, please state clearly that to eliminate the ambiguity, doub...

Hi, I am connecting a third party PoE devices, but when I plug PoE into it then its switch port is restarting continuously. Showing error of Imax error detected. How to resolve this critical issue in PoE devices. Thanks & Regards.

Hi My PE router ASR1002x asks me to upgrade ROMMON while configuring the "no service password-recovery" command. Please assist if I need to upgrade the IOS and what is the upgraded IOS that supports the above command. Regards; Sajid

Si this ever going to get fixed for the non X-series firewalls? I have a number of 5580, 5550, 5520 and 5510 non-X firewalls, running 9.1(x) code which appear to be vulnerable.

Running 7.2(0)D1(1) on 5672UP and am also bitten by this bug.

We are using MSRPC inspection on Cisco 2900 with ZBFW and everything works fine, we started installing 4300's running IOS-XE and MSRPC inspection is no longer working.  The hardware says 1000V, but I'm assuming this would affect any device running IO...

I am affected by this bug, and would like to download v8.8.1 as Cisco recommend, but 8.8.0 is latest available download, not 8.8.1 CSCva17351: HTTP allow list doesn't allow to use some symbol in URL  Can you please publish VCS v8.8.1 for download pl...

Symptom:ELM GUI does not display properly, only the page header is visible. (cisco bug id : CSCul30396)Conditions:User is trying to access ELM using the latest version of Chrome or Firefox or IE. Has anyone found real solution to it, I am facing this...

3,5 years old bug to implement reboot and poweroff commands in own linux CLI. Very fast deploy ;) Bug link: CSCue52005 Other discussions: how to shutdown UCS central vm

i am facing a problem .when i power-up my d9854 it stuck at boot . can any one tell me how to change software in it and what is proper pattern for it ????

does anyone can solve?  i got serious problem, when i try to upload file it always fail then, WLC notify ERROR : REFER TO LOG here i am attch picture thx

I have same identical symptoms in my ASA5510 (relase 8.2(5) ) anyone got it? thanks Gianluca

2016 Jul 26 13:23:24.629 <Devicename> %ACLMGR-3-ACLMGR_VERIFY_FAIL: Verify failed: Specified TCAM region size is zero 2016 Jul 26 13:23:24.630 <Devicename>%AFM-3-AFM_VERIFY_FAIL: Access control (ACL) policy modification on interface port-channel2.402...