Hi, I have a WLC running version 8.5.171.0. After enabling (Cipher-option high) and reloading the WLC i'm still able to connect to the web gui with a browser using TLS 1.1. How can i solve this?
Hi, I have a WLC running version 8.5.171.0. After enabling (Cipher-option high) and reloading the WLC i'm still able to connect to the web gui with a browser using TLS 1.1. How can i solve this?
i have a situation here , i registered GXP2140 IP Phone (grandstream) to cucm 12.5 as adv 3rd party phone using seperate sip profile, the problem is when GXP2140 calls into cisco phone , it rings one or two times and hangs up, but the other c...
Having the same issue of not being able to create DHCP pool of more then 256 address.
I do not understand the symptom description of CSCvz42662: > Symptom:> There is a documentation about having the Multicast/Broadcast not supported in AAA override VLAN> only for the flexconnect under flexconnect summary "Multicast traffic on a AAA ov...
We have an older N5K, 5596T in our lab that stopped booting after a recent power cycle.No console and seems like it could be related to CSCun66310. The description here is a bit vague, so curious what the corrective action is, especially since I can'...
when trying to export SAML provider info xml file on ISE 3.1 p1 , it says File exporting , Please wait while processing. but nothing happens at the end. In the Bug Search Tool it says the problem is FIXED and the the TAC case I raised to report this ...
Im curious how they get a work around for this. The way that the system is designed to work (EAP-MSCAPv2 or the like), the username and password must be in the EAP packet for the flow to continue and since no user is logged in, we cannot process user...
As per our design I am going to install two internet routers with 2 different ISP Link , and will create ZBF on router and for outbound traffic using Zscaler , LAN side will be router to Core switch , now customer required Proxy file will be enable...
8821 firmware 11.0.6SR2-4 roaming wasn’t reliable when AP was using channel 165. Had 4 phones in a room where AP was on channel 165. 2 8821 phones beeped Network Out of Range and stopped working until you left area, two 8821 phones fine and used ch...
This is confusing to me!- How did this bug be not disovered during testing, even a lot of SLR / PLR Licensing changes have occured in ISE 3.0 and 3.1?- How can the Bug be fixed, but no Release or Patch resolving the issue is named?- Why did we upload...
We have AMP 8350 and last version that device support is 6.4.0.14. Is there some workaround to solve this ? Because this device dont support version 7.0.0 +
CSCvz81047 - Cisco NX-OS Software NX-API Command Injection Vulnerability:NXAPI is disabled on our switch and current running System OS version is 7.3(3)N1(1). Will it affect our switch or do I need upgrade 7.3(11)N1(0.852)?
Hello, guys. I'm having a problem registering an AP 1815i on the controller. It already had a registry but after a reboot of the controller, when it tries to register, the following errors are listed: [*04/23/2019 08:20:48.4499] CAPWAP State: Disco...
I would like some clarification on this. This affects Cisco Webex Devices, does that mean it affects all physical devices under this page? https://hardware.webex.com/productsIt includes: Desk series, cameras, room series, headphones, board series, ip...
What VDB version does this relate too?If we encounter this issue on 6.2.3 what is the work around?Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
07-25-2025 05:03 AM | ||
06-16-2025 06:29 AM | ||
06-14-2025 08:36 AM | ||
05-30-2025 08:01 PM | ||
05-27-2025 01:18 AM |
User | Count |
---|---|
1 | |
1 | |
1 | |
1 |